Welltech LP-388 Release 103 - Manual (Page 92)

LP388 User’s Manual 91
16. [voice] command
The voice command is associated with the voice codec setting information.
1. -print: display voice codec information and configuration.
2. -send: three voice packet size can be configured as 20 ms, 40 ms or 60 ms.
3. -priority: set codecs priority in order. Please notice that user can set from 1 to 5
codecs as their need, for example, voice –priority g711u, voice –priority g729
711a g711u means SIP Phone can support only one codec or three codecs.
4. -volume: There are three types can be adjustable, voice volume, input gain and
DTMF volume. Voice volume means the volume user can hear, input gain means
the volume the other side can hear from SIP Phone, DTMF means DTMF
transmitting volume. (voice –volume voice “value of volume”, voice –volume
handsetinput “value of volume”, voice –volume dfmt “value of volume”)
5. –nscng: CNG function (0/1: off/ on)
Note: It is for advanced administrator use only. Please ask your distributor
before changing any settings of this command.