X-Treme Audio Deflector Line - Manual (Page 2)

User’s manual
DEFLECTOR LINE
User’s manual
INDICE DEI CONTENUTI
1. Generalità
2. Istruzioni per l’uso
3. Istruzioni di sicurezza
4. Impilato a pavimento o sospeso?
5. Guida allo Stacking
6. Subwoofers
7. Guida generale all’uso dei Subwoofers
8. Amplificazione
9. Connettori
10. Lunghezza dei cavi
11. Configurazione di sistema
INDICE DEI CONTENUTI
1. Generalità
2. Istruzioni per l’uso
3. Istruzioni di sicurezza
4. Impilato a pavimento o sospeso?
5. Guida allo Stacking
6. Subwoofers
7. Guida generale all’uso dei Subwoofers
8. Amplificazione
9. Connettori
10. Lunghezza dei cavi
11. Configurazione di sistema
1. SAFETY
It is imperative that electro-acoustic speakers are used in full compli-
ance with safety regulations. Professional electro-acoustic systems
are capable of producing high levels of sound pressure, and must
therefore be used with care. Loss of hearing is cumulative, and may
result after exposure for long periods at sound pressure levels above
90 dB. Never stand close to the electro-acoustic speakers working
at high volume. For ground positioning, always check that the base
is flat and stable. Do not pile speakers up too high in outdoor areas,
where the wind may cause the stack to become unstable. Suspend-
ed systems must be assembled by qualified and experienced staff
and professional riggers.
2. GENERAL INFORMATION
The Deflector Line consists of 12 models, (8 speakers + 4 sub-
woofers), including the self-powered version with internal DSP, 24
bit at 96 kHz.
The table below summarizes the main features of each model.
Model
LF
transducer
MF and HF
transducers
Passive
version
input config.
Active (/A)
version
amplifier
XTD88
2 X 8”
Neodimium
/
Full Range,
8 Ohm
Full Range
500 W
(@8Ohm)
Class D XTD88/A
1 X 1”
Mylar
XTD12
1 X 12”
Neodimium
/
Full Range,
8 Ohm
Bi-amp
800+800 W
(@8Ohm)
Class D
XTD12/A
1 X 1.4”
Titanium
XTD15
1 X 15”
Neodimium
/
Full Range,
8 Ohm
Bi-amp
800+800 W
(@8Ohm)
Class D
XTD15/A
1 X 1.4”
Titanium
XTD1015
1 X 15”
Neodimium
1 X 10”
Neodimium
Bi-amp,
8 Ohm
Bi-amp
800+800 W
(@8Ohm)
Class D
XTD1015/A
1 X 1.4”
Titanium
XTDS15
1 X 15”
Neodimium
/
8 Ohm /
16 Ohm
1600 W
(@16Ohm)
Class D
XTDS15/A /
XTDS18
1 X 18”
Neodimium
/
8 Ohm /
16 Ohm
1600 W
(@16Ohm)
Class D
XTDS18/A /
CONTENTS
1. Safety
2. General information
3. Controlled Air Flow Technology
4. Acoustic Wave Shaped Horn TM
5. Subwoofers
6. The Deflector product range & related transducers
7. System installation
7.1 Ground stacked or suspended installation?
7.2 Angulations
7.3 Rigging
8. Passive speakers: guidelines and precautions
8.1 Amplification and limitations
8.2 Presets
8.3 Connections between amplifiers and loudspeaker systems
8.4 Power cables
9. Guidelines for using active speakers
9.1 Technical information
9.2 Presets
10. System configurations
2/12