AEC Self Cleaning Continuous Filters - Manual (Page 24)

Self Cleaning Continuous Filter Chapter 3: Installation 23
Top Bag Removal Collectors
1. From the top side of the tubesheet, lower the bag into the housing up to the bag cuff.
2. The bag cuff has two sewn-in steel bands. Collapse the cuff into a U-shape and
lower the bag until one of the bands is below the tubesheet and one above. Then let
the cuff spring back to its original shape. Smooth the cuff around the hole. The cuff
should form a perfect seal at the tubesheet.
3. Lower the cage assembly into the bag and press firmly into place.
4. Install the remaining bags in the same manner.
5. Locate a blowpipe over each row of bags and connect each blowpipe to the air header
by slipping the blowpipe into the coupling at the collector wall and tightening the
collar.
6. Close and tighten all access doors.
FIG. 7 FIG. 8 FIG. 9
FIG. 10 FIG. 11 FIG. 12