Airlink RT211W - Manual (Page 3)

i
Safety Instructions
For Installation
•
Use only the type of power source indicated on the
marking labels.
•
Use only the power adapter supplied with the product.
•
Do not overload wall outlet or extension cords as this may
increase the risk of electric shock or file. If the power cord
is frayed, replace it with a new one.
•
Proper ventilation is necessary to prevent the product
overheating. Do not block or cover the slots and openings
on the device, which are intended for ventilation and
proper operation. It is recommended to mount the product
with a stack.
•
Do not place the product near any source of heat or
expose it to direct sunshine.
•
Do not expose the product to moisture. Never spill any
liquid on the product.
•
Do not attempt to connect with any computer accessory or
electronic product without instructions from qualified
service personnel. This may result in risk of electronic
shock or file.
•
Do not place this product on an unstable stand or table.
For Using
•
Power off and unplug this product from the wall outlet
when it is not in use or before cleaning. Pay attention to
the temperature of the power adapter. The temperature
might be high.
•
After powering off the product, power on the product at
least 15 seconds later.
•
Do not block the ventilating openings of this product.
•
When the product is expected to be not in use for a period
of time, unplug the power cord of the product to prevent it
from the damage of storm or sudden increases in rating.