Alinco DJ-175 - Manual (Page 41)

8.Set Mode
8
41
8. Set Mode
The Set mode is used to customize the various operational parameters of your DJ-175.
This chart shows the available parameters in the Set mode.
1. Press the FUNC key for at least 2 seconds.
The unit enters the Set mode.
"BS-1" is displayed as a factory-default.
2. Press the MONI key or FUNC key to select a menu.
The Monitor function can't be used in this status.
3. Rotate the dial to change the parameter.
4. Press any key other than the MONI key and FUNC key to complete the settings, or
use the MONI or FUNC keys to continue programming.
The last operated menu will be selected the next time you enter the Set mode.
Entering the Set Mode 8.2
Menu Default setting Function
01 BS-1 Battery Save setting
02 TIMER Timer/Busy scan setting
03 BEP-ON Beep sound ON/OFF
04 1750 Tone-Burst Frequency setting
05 SFT-OF CPU Clock Frequency shift ON/OFF
06 BCL-OF Busy Channel Lock Out ON/OFF
07 TP-OFF TOT Penalty setting
08 DWT-01 DTMF Wait time setting
09 DP-60 DTMF Pause/Burst time setting
10 DB-60 DTMF First Digit Burst time setting
11 BAT-NI Battery type setting
MONI key
FUNC key
Set Mode Operation 8.1