Allmand Brothers MH1000 IDF - Manual (Page 11)

10 10
FUEL AND LUBRICATING OIL
The temperatures mentioned in the table are
the ambient temperatures at the time the engine is
started. However, if the running ambient tempera-
tures are much higher than the starting tempera-
tures, a compromise must be struck and a higher
viscosity oil used (provided starting is satisfactory).
Multigrade oils overcome the problem provided
they have a suitable specification.
NOTE: In testing this engine at the factory, the
manufacturer uses on oil for moderate and low tem-
peratures. This oil is specially formulated to assist
in the break in period, and the manufacturer would
like this oil to be left in the engine for the first 50
hours. Additional information on fuel and lubrication
specifications can be found in the Engine Instruction
Manual.
Periodic Maintenance Schedule
FUEL AND LUBRICATING OIL REQUIREMENTS
Isuzu 3CD1 CAT C1.5