Allmand Brothers MH1000 IDF - Manual (Page 4)

2 3
PREPARING THE MAXI-HEAT FOR DELIVERY OR RENTAL
The Allmand Maxi-Heat ® requires service as well as proper operation in order to provide the
performance and safety for which it was designed. Never deliver or put a machine into ser-
vice with known defects or missing instructions or decals. Always instruct the customer in
the proper operation and safety procedures as described in the operator’s manual. Always
provide the manual with the equipment for proper and safe operation.
Check List:
 Visually inspect the equipment to ensure that all instructions and decals are in place and
legible.
 Check the hitch assembly and safety tow chains.
 Check the jack to make sure it operates properly.

Inspect the tires to ensure good condition and proper inflation.

Check lug nuts and torque to 80-90 ft. lbs. Lug nuts should be retorqued after first 100
mi of towing.
 Check the ground rod cable and the ground lug. Make sure they are clean, undamaged
and functional.
 Make sure the battery is fully charged and the terminals are tight and clean. Ensure the
electrolyte is at the correct level.

Check the service intervals for oil filters, fuel filter, air cleaner and engine oil (see opera-
tor’s manual).
 Check the oil, fuel and coolant levels.
 Start engine and turn heaters on to ensure proper operation.
 Check to make sure the operator’s manual is with the equipment.
NOTE: See operator’s manual for scheduled maintenance intervals.
SAFETY WARNING!
NEVER ALLOW ANYONE TO OPERATE THE EOUIPMENT WITHOUT
PROPER TRAINING.
ALWAYS READ THE INSTRUCTIONS FIRST.
INSPECTION CHECK LIST