Amer Networks SS2R48G4i V2 - Manual (Page 181)

SS2R24G4i/SS2R48G4i
170
Command Explanation
Global configuration mode
anti-netscan log enable
no anti-netscan log enable
Enable/disable the log recording function.
5. Enable the automatic recovery function
Command Explanation
Global configuration mode
anti-netscan recovery enable
no anti-netscan recovery enable
Enable /disable the automatic recovery
function
6. Set the automatic recovery interval
Command Explanation
Global configuration mode
anti-netscan recovery time <seconds>
no anti-netscan recovery time
Set the automatic recovery interval; the “no
anti-netscan recovery time ” will reset it to
the default value.
7. Set the limit of the message rate
Command Explanation
Global configuration mode
anti-netscan limit-rate <pps>
no anti-netscan limit-rate
Set the limit of the message rate, the ” no
anti-netscan limit-rate” will reset it to the
default value.
20.1.2 Monitor and Debug Command
20.1.2.1 show anti-netscan
Command show anti-netscan
Function To display the information of defense against segment scanning
Command Mode Admin Mode
Displayed Information Explanation
Anti-netscan task interval ANTI-NETSCAN task interval in second
Anti-netscan rate limit Message rate limit, in pps
Shut port The list of shut ports
Disabled IP The disabled source IP list
Total The total number of the disabled source IP.