Aqua Lung Dimension i3 / Lotus i3 BC - Manual (Page 15)

English
© 2012 Aqua Lung International
BC
Home
ADJUSTING THE GRIPLOCK™ CYLINDER BAND
2. Adjust the macro adjustment for the proper cylinder size.
3. Secure the excess webbing under the trim pocket (if
equipped) after cylinder size is selected.
Macro Presets
WARNING: The BC must be completely deflated of air before adjusting the GripLock cylinder
band. Failure to do so may result in the cylinder slipping during the course of a dive.
NOTE: The GripLock cylinder band adjusts for all standard cylinder diameters and is ready for
use with an aluminium 80 cf (7.25 inch / 184 mm) cylinder when the BC leaves the factory.
1. There are three macro settings for cylinder size.
A. Larger cylinder
B. Al 80 cf (7.25 in/184 mm)
C. Smaller cylinder