Aqua Lung Dimension i3 / Lotus i3 BC - Manual (Page 6)

English
© 2012 Aqua Lung International
BC
Home
DEALER INSPECTION AND SERVICE
1. It cannot be assumed that the BC is in good working order on the basis that it has received little use since
it was last serviced. Remember that prolonged or improper storage can still result in internal corrosion
and/or deterioration of o-ring seals and valve springs, as well as bladder seam degradation.
2. It is imperative that you obtain prescribed dealer service for your BC at least once a year from an
authorized dealer, including a general air leak inspection, visual inspection of the SureLock weight
pouch handles (if equipped) and complete overhaul of the power inflator and OPR valve. Your
BC may require this service more frequently, depending on the amount of use it receives and the
environmental conditions it is used in.
3. If the BC is used for rental or training purposes in salt, chlorinated, or silted fresh water, it will require
prescribed dealer service every three to six months. Use in chlorinated water will greatly accelerate
the deterioration of most components, and require more frequent service.
4. DO NOT attempt to perform any disassembly or overhaul service of your BC. Doing so may cause
the BC to dangerously malfunction, and will render the warranty null and void. All service must be
performed by an Authorized Aqua Lung Dealer or Distributor
NOTE: It is important to obtain prescribed dealer service for your BC at least once annually,
from an Authorized Aqua Lung Dealer or Distributor, your personal safety and the mechanical
integrity of your BC depends on it.
WARNING: DO NOT attempt to perform any disassembly or service of your BC. Service
requiring disassembly must only be performed by a factory-trained Aqua Lung technician.
To obtain service or repair, such as power inflator service or replacement of the bladder,
see your local Authorized Aqua Lung Dealer or Distributor.