Archgard 25-BVI20N-2 - Manual (Page 30)

25-BVI20N –2 30
VENTING OF THE EURO-25 INSIDE THE HOST GAS FIREPLACE
A connector kit (25-ICKIT4 or 25-ICKIT5) is used to connect the EURO 25
insert to the host gas fireplace’s venting system. The connector slips into the host
fireplace’s B-vent.

Follow the connector kit’s instructions in assembling the kit.

Remove the flue adapter plate from the EURO 25 insert and attach the
connector kit to the plate with the sheet metal screws provided.

Slide the connector into the host gas fireplace’s vent.

Slide the flue adapter plate onto the EURO 25 as it is being inserted into the
host fireplace. Level the EURO 25 as described in manual.

Complete the installation of the surround and accessories as described in the
manual.

Check for proper venting of the fireplace after installation.
* 25-ICKIT4 is the connector kit used for host fireplaces with 4” diameter flue
connector and venting system. 25-ICKIT5 is for host fireplaces with 5”
diameter flue connector and venting system. For venting systems larger than
5” diameter, run 4” diameter flexible aluminum gas liner from the insert
through the host’s venting system to the host fireplace’s vent termination.
Connector Kit
(25-ICKIT4 or 25-ICKIT5)
Gasket
B-Vent
APPENDIX A
EURO 25 - INSTRUCTIONS FOR
INSTALLATION INTO VENTED GAS FIREPLACES