ARM Electronics DVR4CD - Manual (Page 60)

5 9
PTZ Reset
1. By preset function, possible to setup direction and Focus of
1. PTZ camera.
2. After selecting position at PTZ control mode, save data at
2. preset mode.
3. Setup number from 1 ~ 123 by FASTER & SLOWER button,
4. Save by front panel key No.1 button or F1 button on remote
4. controller.
5. To move to saved location, press front panel key button No.2
5. or F2 on the remote cintroller.
Swing
1. Swing function dedicate each No. of saved preset and swing
1. as pan or tilt.
2. Changing mode by “BACKWARD” and “PLAY” button.
2. Changing setup by “FASTER” and “SLOWER” button.
3. Pan swing mode Rotate left, right side.
3. Tilt Swing mode Rotate up, down side.
3. Start preset Select starting point (1 ~ 123).
3. End preset Select end point (1 ~ 123).
3. Swing time Select half time as each point (1 ~ 64 sec).
3. Swing speed select moving speed on camera (1 ~ 64).
4. Save by front panel key No.1 button or F1 button on remote
4. controller.
5. For start swing mode, press front panel key No.2 or F2
5. button on remote controller.
Cross Cable Making Tip