Epson Apex-80 - Manual (Page 24)

3. Align the left side of the left edge guide with the guide mark on the
paper guide. See Figure 1-17. You may later wish to adjust this edge
guide depending on the margin setting in your application program.
Figure 1-17.
Guide mark for paper alignment
Automatic paper loading
Now you are ready to load single-sheet paper using the Apex80’s
AUTO LOAD feature.
To load paper automatically, just follow these steps:
1. Push back the paper release lever. (See Figure 1-16.) The single-arrow
icon behind the lever marks the position the lever should be in for
loading single-sheet paper.
2. Turn on the printer.
3. Make sure that the ON LINE indicator is off. If it is not off, press the
touch-sensitive panel labeled ON/OFF LINE.
4. Adjust the right edge guide to fit the sire of the paper.
5. Slide the paper down through the edge guides until it meets
resistance. Press down on the paper a bit more to make sure that it
is firmly in place, as shown in Figure 1-18.
Setting Up 1-17