Epson Apex-80 - Manual (Page 86)

ESC J Perform n/216-inch Line Feed
Format:
ASCII code: ESC J n
Decimal: 27 74 n
Hexadecimal: 1B 4A n
Comments:
Advances the paper n/216 of an inch. The value of n must be from
O-255. This command produces an immediate line feed but does not
affect subsequent line spacing and does not produce a carriage
return.
Vertical tabbing
Format:
Tab Vertically
A S C I I c o d e : V T
Decimal: 11
Hexadecimal: 0 B
Comments:
Advances the paper to the next tab setting in the channel selected
by ESC/. If no channel has been selected, channel 0 is used. If no
vertical tabs have been selected, the paper advances one line.
ESC B Set Vertical Tabs
Format:
ASCII code:
ESC B n1 n2 . . . NUL
Decimal: 2 7 6 6 n 1 n 2 . . . 0
Hexadecimal:
1B 42 n1 n2 ... 00
Comments:
Sets up to 16 vertical tabs in the current line spacing. Tab settings
are not affected by subsequent changes in line spacing. The tab
settings are entered as nl, n2, etc., all from 1-255, in ascending order.
The NUL character indicates the end of the command. All settings
are stored in channel 0 (see ESC b). ESC B NUL clears the tab
settings.
Command Summary A-15