Eneo IRLED-401E - Manual (Page 17)

17
DE
EN
FR
PL
RU
Ceiling or parapet mounting
• Install the illuminator in a properly airy zone.
• Place the bracket ⓐ in the desired position against the ceiling or para-
pet.
• To make this operation easier, it is possible to loosen the knurled hand-
wheel ⓑ or in case the nut opposite to the handwheel, and rotate the
bracket ⓐ as to the illuminator.
• Mark the position of mounting holes.
• Make the mounting holes, taking into consideration the type of material,
which the wall or the ceiling is made of, and the type of fixings to be
used.
• Mount the bracket ⓐ to the ceiling or parapet in a firm way.
• If loosened during the bracket installation, please remember to tighten
the knurled handwheel ⓑ and/or the nut opposite to the handwheel.
A B
60
28 44
6,5 6,5
122.5