Eneo IRLED-401E - Manual (Page 20)

20
Connections
The illuminator is provided with integrated power supply and twilight control;
therefore, it is sufficient to simply connect the power supply cable to the
main.
When connecting the cable to the 3 pin power connector pay attention to
the correct pin assignment. Make sure that the seal is positioned correctly
and connector screwed on tightly when connected to the illuminator.
PHASE NEUTRAL
EARTH
PHASE NEUTRAL
EARTH
PHASE NEUTRAL
EARTH
NEUTRAL PHASE
EARTH
Phase Neutral
Earth
Phase
Earth
Neutral
Phase
Earth
Neutral
Phase
Earth
Neutral