Ensemble Designs BrightEye NXT 410 Clean HDMI Router User Manual
Ensemble Designs Video
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Preface
- Document Organization at a Glance
- In this Chapter
- Purpose of Document
- Intended Audience
- Introductory Videos
- Additional Resources
- In this Chapter
- Features
- Clean Switching between Asynchronous Sources
- Assignable I/O and Flexible Architecture
- Signal Diagnostics
- Ethernet Connectivity and Long Distances
- Front Panel Controls
- Rear Connectors
- Default Port Configuration as Shipped from the Factory
- Applications
- In this Chapter
- Connecting Cables to Ports
- Connecting a Reference If Needed
- Connecting the Power Supply
- Connecting Ethernet for Web Control Point (Optional)
- RS-232 Interface Option
- In this Chapter
- Router Configuration Menus
- Assigning Shortcut Buttons
- About Port Configuration
- Configuring the Router’s Ports from the Front Panel
- Configuring the Router’s Ports from the Web Interface
- About Clean Switches and Clean Switch Configuration
- Configuring Clean Switches from the Front Panel
- Configuring Clean Switches from the Web Interface
- Setting Up Timing and Genlock
- Working with the Internal Test Signal Generators
- Configuring the Internal Test Signal Generators from the Front Panel
- To Select the TSG Standard
- To Select the TSG Pattern
- To Set the TSG Vertical Timing
- To Set the TSG Horizontal Timing
- To Configure the TSG Slate
- To Configure the TSG Slate Text
- To Configure the TSG Cyclops
- To Configure the TSG Audio Reference Level
- To Configure the TSG Audio Enables
- To Configure the TSG Audio Channels
- Configuring the Internal Test Signal Generators from the Web Interface
- Configuring the Internal Test Signal Generators from the Front Panel
- Setting Up a Web Control Point (Optional)
- Establishing Additional Web Control Points and Access Authentication
- Creating and Editing Profiles
- Setting Up Salvos
- Security and Administrative Access to Settings
- Saving and Restoring Configuration Settings
- In this Chapter
- Operations Using the Front Control Panel
- Operations Using a Web Control Point
- The BrightEye NXT’s Approach to Control Integration
- RS-232 Interface Option
- Supported Control Protocols Overview
- Software Development Kit (SDK)
- Configuring External Control
- Automation Protocols
- Switching Signals Does Not Occur Smoothly
- Cannot Connect to the BrightEye NXT from a Web Browser
- Supported Browsers
- The Take Button is Grayed Out
- Resetting to Factory Default Settings
- Software Updating
- Warranty and Factory Service
- For BrightEye NXT 410 Clean HDMI Router
- For BrightEye NXT 415 and 430 Compact Routers