Ensemble Designs BrightEye 5 Analog Composite TBC and Frame Sync - Manual (Page 15)

www.ensembledesigns.com BrightEye 5 - Page 15
5 Analog Composite TBC and Frame Sync User Guide
Output Menu
Use the Output menu to set the following output conditions for the BrightEye 5:
• V Blanking – Set the vertical blanking to Narrow (NTSC: lines 1-9, PAL: lines 1-6) or
Wide (NTSC: lines 1-20, PAL: lines 1-22).
• Test Pattern – Select a test pattern at the module output from Black or Color Bars or turn to
Off for normal operation.
• Signal Mute – The signal muting control affects the behavior of the module when the video
input is lost or interrupted. Set the control for one of the following conditions:
No Muting – Nothing is done when the input is lost or intermittent. In this case, the module
may present a very disturbed output in response to an intermittent input.
Mute on Noise – The output will go black if the input is lost.
Freeze on Noise – The output will freeze on the last image when the input is lost.
BrightEye 5 Output Menu