H3C Technologies H3C S12500-X Series Switches - Manual (Page 6)

6
Figure 6 Removing a CXP AOC
Verifying the installation
1. Execute the display transceiver interface command after the
installation is complete.
{
If the transceiver module profile is correctly displayed, the
installation is correct.
{
If an error message is displayed, the installation is incorrect or
the module is faulty. Follow the instructions in this guide to
re-install the module and its cable. If the problem persists,
contact H3C Support.
2. Execute the display this command in port view for the module to
verify the port status. If the port is shut down, execute the undo
shutdown command to bring up the port.
Copyright © 2014 Hangzhou H3C Technologies Co., Ltd.