H3C Technologies H3C S7500E Series Switches - Manual (Page 17)

2-8
To do… Use the command… Remarks
Display ACFP rule configuration
information
display acfp rule-info { in-interface
[ interface-type interface-number ] |
out-interface [ interface-type
interface-number ] | policy [ client-id
policy-index ] }
Display the configuration
information of the ACFP trap
function
display snmp-agent trap-list
Configuring ACFP Client (OAP Card)
You need to configure the ACFP collaboration policy and ACFP collaboration rules on the ACFP client,
namely, the OAP card through MIB. The specific configuration depends on the service software used
on the ACFP client. For the configuration of the OAP card, refer to the related manual of the ordered
OAP card.