H3C Technologies H3C S7500E Series Switches Instruction Manuals and User Guides
We have 27 Instruction Manuals and User Guides for H3C S7500E Series Switches H3C Technologies
Manuals
| Recognized languages: | English |
|---|---|
| Pages: | 8 |
| Size: | 690 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 42 |
| Size: | 2.41 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Overview
- SFP modules
- 100-Megabit SFP fiber transceiver module
- 622-Megabit SFP fiber transceiver module
- Gigabit SFP fiber transceiver module
- 2.5-Gigabit SFP fiber transceiver module
- 100-Megabit BIDI fiber transceiver module
- Gigabit BIDI fiber transceiver module
- BIDI GEPON OLT fiber transceiver module
- Gigabit CWDM fiber transceiver module
- Gigabit SFP copper transceiver module
- Gigabit SFP cable
- SFP+ modules
- XFP modules
- CX4 cables
- QSFP+ modules
- CFP modules
- CFP2 modules
- CXP modules
| Recognized languages: | English |
|---|---|
| Pages: | 58 |
| Size: | 751 KB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- IRF configuration
- IRF overview
- Basic concepts
- Establishment, operation, and maintenance of an IRF fabric
- IRF fabric configuration task list
- Pre-configuring an IRF member switch in standalone mode
- Saving configuration to the startup configuration file
- Switching operating mode
- Accessing an IRF fabric
- Configuring IRF member switches in IRF mode
- Specifying an IRF domain ID for an IRF fabric
- Modifying a member ID for a switch
- Specifying a priority for a member switch
- Configuring IRF ports
- Enabling auto reboot for IRF fabric merge
- Configuring a description for a member switch
- Configuring load sharing criteria for IRF links
- Specifying the preservation time of bridge MAC address
- Enabling automatic system software updating
- Setting the IRF link down report delay
- Configuring MAD detection
- IRF configuration fast recovery
- Displaying and maintaining an IRF fabric
- IRF fabric configuration examples
- LACP MAD detection-enabled IRF configuration example (with two member switches)
- BFD MAD detection-enabled IRF configuration example (with two member switches)
- LACP MAD detection-enabled IRF configuration example (with four member switches)
- BFD MAD detection-enabled IRF configuration example (with four member switches)
- Switching the operating mode of IRF member switches from IRF to standalone
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 25 |
| Size: | 6.02 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Contents
- Installation quick start
- Chassis views and technical specifications
- Safety recommendations
- Examining the installation site
- Installing the switch
- Accessing the switch for the first time
- Obtaining documentation
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 191 |
| Size: | 8.13 MB |
Show table of contents
Read manual
Document Outline
- 00-1Cover.pdf
- 01-Chapter1 Product Overview.pdf
- 02-Chapter2 LPU Modules.pdf
- 03-Chapter3 Installation Preparations.pdf
- 04-Chapter4 Switch Installation.pdf
- Chapter 4 Switch Installation
- 4.1 Confirming Installation Preparation
- 4.2 Installation Flow
- 4.3 Mounting the Switch in User-Supplied Cabinet
- 4.4 Mounting the Switch in B68 Cabinet
- 4.5 Connecting PGND Wire and Power Cord
- 4.6 Installing the AC Power Distribution Box
- 4.7 Installing DC Power Distribution Box
- 4.8 Installing Cabling Rack
- 4.9 Installing Fan Tray
- 4.10 Installing LPU
- 4.11 Connecting Interface Cables
- 4.12 Cable Routing Recommendations
- 4.13 Cable Management
- 4.14 Verifying the Installation
- Chapter 4 Switch Installation
- 05-Chapter5 System Debugging.pdf
- 06-Chapter6 Switch Monitoring and Maintenance.pdf
- Chapter 6 Switch Monitoring and Maintenance
- 6.1 Monitoring the Switch
- 6.2 Hardware Maintenance
- 6.3 Software Upgrade
- 6.4 Password Loss
- Chapter 6 Switch Monitoring and Maintenance
- 07-AppendixA Engineering Labels for Cables.pdf
- Appendix A Engineering Labels for Cables
- A.1 Introduction to Labels
- A.2 Engineering Labels for Ethernet Cables
- A.3 Engineering Labels for Optical Fibers
- A.4 Engineering Labels for Power Cables
- Appendix A Engineering Labels for Cables
- 08-AppendixB Installation of B68 Cabinet.pdf
- Appendix B Installation of B68 Cabinet
- B.1 Installation Overview
- B.2 Cabinet Installation on the Cement Ground
- B.3 Cabinet Installation on Raised Floor
- B.3.1 Introduction to Support and Slide Rail
- B.3.2 Installation Flow
- B.3.3 Support Positioning
- B.3.4 Installation of Support and Slide Rail
- B.3.5 Installing Supporting Accessories of Raised Floor
- B.3.6 Cabinet Leveling
- B.3.7 Cabinet Combination Connection
- B.3.8 Cabinet Fastening
- B.3.9 Insulation Test
- B.3.10 Floor Recovery
- B.4 Quakeproof Reinforcement of Cabinet
- Appendix B Installation of B68 Cabinet
- 09-AppendixC Lightning Protection of the Switch.pdf
| Recognized languages: | English |
|---|---|
| Pages: | 19 |
| Size: | 6.10 MB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 194 |
| Size: | 1.80 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 CLI Configuration
- What Is CLI?
- Entering the CLI
- Command Conventions
- Undo Form of a Command
- CLI View Description
- Using the CLI Online Help
- Typing Commands
- Checking Command Line Errors
- Using Command History
- Controlling CLI Display
- Configuring User Privilege and Command Levels
- Configure user privilege level by using AAA authentication parameters
- Example of configuring a user privilege level by using AAA authentication parameters
- Configure the user privilege level under a user interface
- Example of configuring a user privilege level under a user interface
- Introduction
- Setting the authentication mode for user privilege level switch
- Switching the user privilege level
- Configure user privilege level by using AAA authentication parameters
- Saving the Current Configuration
- Displaying and Maintaining CLI
- 2 Login Methods
- 3 CLI Login
- 4 NMS Login
- 5 User Login Control
- 6 FTP Configuration
- 7 TFTP Configuration
- 8 File System Management
- 9 Configuration File Management
- Configuration File Overview
- Configuration Display
- Saving the Current Configuration
- Setting Configuration Rollback
- Specifying a Startup Configuration File for the Next System Startup
- Backing Up the Startup Configuration File
- Deleting the Startup Configuration File for the Next Startup
- Restoring the Startup Configuration File
- Displaying and Maintaining Device Configuration
- 10 Software Upgrade Configuration
- Device Software Overview
- Software Upgrade Methods
- Upgrading the Boot ROM Program Through a System Reboot
- Upgrading the Boot File Through a System Reboot
- Software Upgrade by Installing Hotfixes
- Patch and patch file
- Incremental patch
- Common patch and temporary patch
- IDLE state
- DEACTIVE state
- ACTIVE state
- RUNNING state
- Step-by-Step Patch Installation Task List
- Configuring the Patch File Location
- Loading a Patch File
- Activating Patches
- Confirming Running Patches
- Step-by-Step Patch Uninstallation Task List
- Stopping Running Patches
- Deleting Patches
- Patch and patch file
- Displaying and Maintaining Software Upgrade
- Software Upgrade Configuration Example
- 11 Device Management
- Device Management Overview
- Device Management Configuration Task List
- Configuring the Device Name
- Configuring the System Clock
- Enabling/Disabling the Display of Copyright Information
- Configuring a Banner
- Configuring the Exception Handling Method
- Rebooting a Device
- Scheduled Task Configuration
- Configuring Temperature Alarm Thresholds for a board
- Clearing the 16-bit Interface Indexes Not Used in the Current System
- Configuring the System Load Sharing Function
- Enabling Active/Standby Mode for Service Ports on SRPUs
- Configuring the Traffic Forwarding Mode of SRPUs
- Configuring the Working Mode of LPUs
- Enabling the Port Down Function Globally
- Enabling Expansion Memory Data Recovery Function on a board
- Identifying and Diagnosing Pluggable Transceivers
- Displaying and Maintaining Device Management Configuration
- 12 Index
| Recognized languages: | English |
|---|---|
| Pages: | 115 |
| Size: | 10.38 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Preparing for installation
- Installing the switch
- Confirming installation preparations
- Attaching slide rails and cage nuts to the rack (optional)
- Attaching mounting brackets and cable management brackets to the rack
- Installing an air filter (optional)
- Mounting the switch to the rack
- Mounting the switch on a workbench or on the floor
- Grounding the switch
- Installing FRUs
- Setting up an IRF fabric
- Connecting your switch to the network
- Troubleshooting
- Replacement procedures
- Appendix A Chassis views and technical specifications
- Appendix B FRUs and compatibility matrixes
- Appendix C LEDs
- Appendix D Cables
- Appendix E Cabling recommendations
- Appendix F Repackaging the switch
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 38 |
| Size: | 543 KB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 IRF Configuration
- Introduction to IRF
- Basic Concepts
- Working Process
- IRF Virtual Device Configuration Task List
- Switching Operating Mode
- Configuring an IRF Virtual Device
- Accessing an IRF Virtual Device
- Displaying and Maintaining an IRF Virtual Device
- IRF Virtual Device Configuration Examples
- 2 Index
| Recognized languages: | English |
|---|---|
| Pages: | 165 |
| Size: | 11.88 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Preparing for installation
- Installing the switch
- Installing FRUs
- Setting up an IRF fabric
- Connecting your switch to the network
- Hardware management and maintenance
- Displaying information about the switch
- Displaying software and hardware version information
- Displaying switch running information
- Displaying detailed information about a card
- Displaying electronic label data
- Displaying card CPU usage statistics
- Displaying card memory usage statistics
- Displaying CF card information
- Displaying the operating status of fans
- Displaying the operating status of power modules
- Configuring load sharing for SRPUs
- Configuring the temperature thresholds for a card
- Port configuration and management
- Verifying and diagnosing transceiver modules
- Configuring a software exception handling method
- Displaying IRF information
- Saving the running configuration
- Rebooting a card or the switch
- Displaying information about the switch
- Troubleshooting
- Replacement procedures
- Appendix A Product overview and technical specifications
- Appendix B FRU ordering guide
- Appendix C LEDs
- Appendix D Cables
- Appendix E Cabling recommendations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 205 |
| Size: | 2.15 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 ARP Configuration
- ARP Overview
- Configuring ARP
- Configuring Gratuitous ARP
- Displaying and Maintaining ARP
- 2 Proxy ARP Configuration
- Proxy ARP Overview
- Enabling Proxy ARP
- Displaying and Maintaining Proxy ARP
- Proxy ARP Configuration Examples
- 3 IP Addressing Configuration
- 4 DHCP Overview
- 5 DHCP Server Configuration
- Introduction to DHCP Server
- DHCP Server Configuration Task List
- Configuring an Address Pool for the DHCP Server
- Configuration Task List
- Creating a DHCP Address Pool
- Configuring an Address Allocation Mode for a Common Address Pool
- Configuring Dynamic Address Allocation for an Extended Address Pool
- Configuring a Domain Name Suffix for the Client
- Configuring DNS Servers for the Client
- Configuring WINS Servers and NetBIOS Node Type for the Client
- Configuring the BIMS Server Information for the Client
- Configuring Gateways for the Client
- Configuring Option 184 Parameters for the Client with Voice Service
- Configuring the TFTP Server and Bootfile Name for the Client
- Configuring Self-Defined DHCP Options
- Enabling DHCP
- Enabling the DHCP Server on an Interface
- Applying an Extended Address Pool on an Interface
- Configuring the DHCP Server Security Functions
- Configuring the Handling Mode for Option 82
- Displaying and Maintaining the DHCP Server
- DHCP Server Configuration Examples
- Troubleshooting DHCP Server Configuration
- 6 DHCP Relay Agent Configuration
- Introduction to DHCP Relay Agent
- DHCP Relay Agent Configuration Task List
- Configuring the DHCP Relay Agent
- Displaying and Maintaining DHCP Relay Agent Configuration
- DHCP Relay Agent Configuration Examples
- Troubleshooting DHCP Relay Agent Configuration
- 7 DHCP Client Configuration
- 8 DHCP Snooping Configuration
- 9 IPv4 DNS Configuration
- 10 IPv6 DNS Configuration
- 11 IP Performance Optimization Configuration
- 12 UDP Helper Configuration
- 13 IPv6 Basics Configuration
- IPv6 Overview
- IPv6 Basics Configuration Task List
- Configuring Basic IPv6 Functions
- Configuring IPv6 NDP
- Configuring PMTU Discovery
- Configuring IPv6 TCP Properties
- Configuring ICMPv6 Packet Sending
- Displaying and Maintaining IPv6 Basics Configuration
- IPv6 Configuration Example
- Troubleshooting IPv6 Basics Configuration
- 14 DHCPv6 Configuration
- 15 Tunneling Configuration
- Tunneling Overview
- Tunneling Configuration Task List
- Configuring a Tunnel Interface
- Configuring an IPv6 Manual Tunnel
- Configuring a 6to4 Tunnel
- Configuring an ISATAP Tunnel
- Configuring an IPv4 over IPv4 Tunnel
- Configuring an IPv4 over IPv6 Tunnel
- Configuring an IPv6 over IPv6 Tunnel
- Configuring a GRE over IPv4 Tunnel
- Configuring a GRE over IPv6 Tunnel
- Displaying and Maintaining Tunneling Configuration
- Troubleshooting Tunneling Configuration
- 16 Index
| Recognized languages: | English |
|---|---|
| Pages: | 161 |
| Size: | 18.24 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Preparing for installation
- Installing the switch
- Installing FRUs
- Connecting your switch to the network
- Replacement procedures
- Appendix A Chassis views and technical specifications
- Appendix B FRUs and compatibility matrixes
- Appendix C LEDs
- Appendix D Transceiver modules
- Appendix E Cables
- Appendix F Engineering labels
- Appendix G Cable management
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 337 |
| Size: | 3.21 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 Ethernet Port Configuration
- Ethernet Port Numbering Conventions
- Combo Port Configuration
- Management Ethernet Interface Configuration
- Configuring Basic Settings of an Ethernet Port
- Setting Speed Options for Auto Negotiation on an Ethernet Port
- Configuring Flow Control on an Ethernet Port
- Configuring Link Change Suppression on a Port
- Performing Loopback Testing on an Ethernet Port
- Configuring a Port Group
- Configuring Traffic Storm Protection
- Setting the Statistics Polling Interval
- Enabling Forwarding of Jumbo Frames
- Enabling Loopback Detection on an Ethernet Port
- Configuring the MDI Mode for an Ethernet Port
- Testing the Cable on an Ethernet Port
- Configuring the Connection Mode of an Ethernet Port
- Displaying and Maintaining an Ethernet Port
- 2 EPON Configuration
- 3 OLT Configuration
- OLT Configuration
- OLT Configuration Task List
- EPON System Parameter Configuration
- Configuring Dynamic Bandwidth Allocation and Related Parameters
- Configuring Grant filtering on the OLT port
- Configuring the Link Type of an OLT Port
- Enabling Layer-2 Communication Between the ONUs Attached to an OLT Port
- Configuring Fiber Backup
- Displaying and Maintaining OLT Configuration
- OLT Configuration Examples
- OLT Configuration
- 4 ONU Remote Management Configuration
- ONU Configuration
- ONU Configuration Task List
- Creating an ONU Port
- Binding an ONU with an ONU Port
- Configuring Batch ONU Binding and Automatic ONU Binding
- Configuring the Management VLAN of the ONU
- Configure the ONU Bandwidth Allocation and Related Parameters
- Enabling Related Protocols on an ONU
- Configuring the Multicast Mode of the ONU
- Configuring the Link Type of an ONU Port
- Enabling FEC
- Configuring an ONU to Report Information to the OLT
- Configuring Traffic Encryption
- Testing the Link Between an ONU and the OLT
- Testing the Cable Connected to an UNI Port
- Deregistering an ONU
- Updating ONUs
- Restarting an ONU
- Displaying and Maintaining ONU Port Configuration
- Configuration Examples for ONU Remote Management
- ONU Configuration
- 5 UNI Port Configuration
- 6 Alarm Configuration
- 7 Supported Switch Features and Restrictions
- 8 Loopback Interface and Null Interface Configuration
- 9 MAC Address Table Configuration
- 10 MAC Information Configuration
- 11 Ethernet Link Aggregation Configuration
- Overview
- Ethernet Link Aggregation Configuration Task List
- Configuring an Aggregation Group
- Configuring an Aggregate Interface
- Configuring Load Sharing for Link Aggregation Groups
- Displaying and Maintaining Ethernet Link Aggregation
- Ethernet Link Aggregation Configuration Examples
- 12 Port Isolation Configuration
- 13 MSTP Configuration
- Overview
- Introduction to STP
- Introduction to RSTP
- Introduction to MSTP
- MSTP Configuration Task List
- Configuring MSTP
- Configuring an MST Region
- Configuring the Root Bridge or a Secondary Root Bridge
- Configuring the Work Mode of an MSTP Device
- Configuring the Priority of a Device
- Configuring the Maximum Hops of an MST Region
- Configuring the Network Diameter of a Switched Network
- Configuring Timers of MSTP
- Configuring the Timeout Factor
- Configuring the Maximum Port Rate
- Configuring Ports as Edge Ports
- Configuring Path Costs of Ports
- Configuring Port Priority
- Configuring the Link Type of Ports
- Configuring the Mode a Port Uses to Recognize/Send MSTP Packets
- Enabling the Output of Port State Transition Information
- Enabling the MSTP Feature
- Performing mCheck
- Configuring Digest Snooping
- Configuring No Agreement Check
- Configuring Protection Functions
- Remotely Configuring MSTP for an ONU
- Displaying and Maintaining MSTP
- MSTP Configuration Example
- 14 BPDU Tunneling Configuration
- 15 VLAN Configuration
- Introduction to VLAN
- Configuring Basic VLAN Settings
- Configuring Basic Settings of a VLAN Interface
- Port-Based VLAN Configuration
- MAC-Based VLAN Configuration
- Protocol-Based VLAN Configuration
- IP Subnet-Based VLAN Configuration
- Displaying and Maintaining VLAN
- 16 Super VLAN Configuration
- 17 Isolate-User-VLAN Configuration
- 18 Voice VLAN Configuration
- 19 GVRP Configuration
- 20 QinQ Configuration
- 21 VLAN Mapping Configuration
- 22 LLDP Configuration
- 23 Service Loopback Group Configuration
- 24 Index
| Recognized languages: | English |
|---|---|
| Pages: | 386 |
| Size: | 3.93 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 IP Routing Basics Configuration
- 2 Static Routing Configuration
- 3 RIP Configuration
- RIP Overview
- Configuring RIP Basic Functions
- Configuring RIP Route Control
- Configuring RIP Network Optimization
- Configuring RIP Timers
- Configuring Split Horizon and Poison Reverse
- Configuring the Maximum Number of Load Balanced Routes
- Enabling Zero Field Check on Incoming RIPv1 Messages
- Enabling Source IP Address Check on Incoming RIP Updates
- Configuring RIPv2 Message Authentication
- Specifying a RIP Neighbor
- Configuring RIP-to-MIB Binding
- Configuring the RIP Packet Sending Rate
- Configuring BFD for RIP
- Displaying and Maintaining RIP
- RIP Configuration Examples
- Configuring RIP Version
- Configuring RIP Route Redistribution
- Configuring an Additional Metric for a RIP Interface
- Configuring RIP to Advertise a Summary Route
- Configuring BFD for RIP (Single-Hop Detection in BFD Echo Packet Mode)
- Configuring BFD for RIP (Bidirectional Detection in BFD Control Packet Mode)
- Troubleshooting RIP
- 4 OSPF Configuration
- Introduction to OSPF
- OSPF Configuration Task List
- Enabling OSPF
- Configuring OSPF Areas
- Configuring OSPF Network Types
- Configuring OSPF Route Control
- Prerequisites
- Configuring OSPF Route Summarization
- Configuring OSPF Inbound Route Filtering
- Configuring ABR Type-3 LSA Filtering
- Configuring an OSPF Cost for an Interface
- Configuring the Maximum Number of OSPF Routes
- Configuring the Maximum Number of Load-balanced Routes
- Configuring a Priority for OSPF
- Configuring OSPF Route Redistribution
- Advertising a Host Route
- Configuring OSPF Network Optimization
- Prerequisites
- Configuring OSPF Packet Timers
- Specifying an LSA Transmission Delay
- Specifying SPF Calculation Interval
- Specifying the LSA Minimum Repeat Arrival Interval
- Specifying the LSA Generation Interval
- Disabling Interfaces from Sending OSPF Packets
- Configuring Stub Routers
- Configuring OSPF Authentication
- Adding the Interface MTU into DD Packets
- Configuring the Maximum Number of External LSAs in LSDB
- Making External Route Selection Rules Defined in RFC 1583 Compatible
- Logging Neighbor State Changes
- Configuring OSPF Network Management
- Enabling Message Logging
- Enabling the Advertisement and Reception of Opaque LSAs
- Configuring OSPF to Give Priority to Receiving and Processing Hello Packets
- Configuring the LSU Transmit Rate
- Configuring OSPF Graceful Restart
- Configuring BFD for OSPF
- Displaying and Maintaining OSPF
- OSPF Configuration Examples
- Configuring OSPF Basic Functions
- Configuring OSPF Route Redistribution
- Configuring OSPF to Advertise a Summary Route
- Configuring an OSPF Stub Area
- Configuring an OSPF NSSA Area
- Configuring OSPF DR Election
- Configuring OSPF Virtual Links
- Configuring OSPF Graceful Restart
- Configuring Route Filtering
- Configuring BFD for OSPF
- Troubleshooting OSPF Configuration
- 5 IS-IS Configuration
- IS-IS Overview
- IS-IS Configuration Task List
- Configuring IS-IS Basic Functions
- Configuring IS-IS Routing Information Control
- Configuration Prerequisites
- Configuring IS-IS Link Cost
- Specifying a Priority for IS-IS
- Configuring the Maximum Number of Equal Cost Routes
- Configuring IS-IS Route Summarization
- Advertising a Default Route
- Configuring IS-IS Route Redistribution
- Configuring IS-IS Route Filtering
- Configuring IS-IS Route Leaking
- Tuning and Optimizing IS-IS Networks
- Configuration Prerequisites
- Specifying Intervals for Sending IS-IS Hello and CSNP Packets
- Specifying the IS-IS Hello Multiplier
- Configuring a DIS Priority for an Interface
- Disabling an Interface from Sending/Receiving IS-IS Packets
- Enabling an Interface to Send Small Hello Packets
- Configuring LSP Parameters
- Configuring SPF Parameters
- Setting the LSDB Overload Bit
- Configuring IS-IS Authentication
- Configuring System ID to Host Name Mappings
- Configuring IS-IS GR
- Enabling the Logging of Neighbor State Changes
- Enabling IS-IS SNMP Trap
- Binding an IS-IS Process with MIBs
- Configuring BFD for IS-IS
- Displaying and Maintaining IS-IS
- IS-IS Configuration Example
- 6 BGP Configuration
- BGP Overview
- BGP Configuration Task List
- Configuring BGP Basic Functions
- Controlling Route Generation
- Controlling Route Distribution and Reception
- Prerequisites
- Configuring BGP Route Summarization
- Advertising a Default Route to a Peer or Peer Group
- Configuring BGP Route Distribution/Reception Filtering Policies
- Enabling BGP and IGP Route Synchronization
- Limiting Prefixes Received from a Peer/Peer Group
- Configuring BGP Route Dampening
- Configuring a Shortcut Route
- Configuring BGP Route Attributes
- Tuning and Optimizing BGP Networks
- Prerequisites
- Configuring BGP Keepalive Interval and Holdtime
- Configuring the Interval for Sending the Same Update
- Configuring BGP Soft-Reset
- Enabling the BGP ORF Capability
- Enabling Quick eBGP Session Reestablishment
- Enabling MD5 Authentication for TCP Connections
- Configuring BGP Load Balancing
- Forbiding Session Establishment with a Peer or Peer Group
- Configuring a Large Scale BGP Network
- Configuring BGP GR
- Enabling Trap
- Enabling Logging of Peer State Changes
- Configuring BFD for BGP
- Displaying and Maintaining BGP
- BGP Configuration Examples
- Troubleshooting BGP
- 7 IPv6 Static Routing Configuration
- 8 RIPng Configuration
- 9 OSPFv3 Configuration
- Introduction to OSPFv3
- IPv6 OSPFv3 Configuration Task List
- Enabling OSPFv3
- Configuring OSPFv3 Area Parameters
- Configuring OSPFv3 Network Types
- Configuring OSPFv3 Routing Information Control
- Tuning and Optimizing OSPFv3 Networks
- Configuring OSPFv3 GR
- Displaying and Maintaining OSPFv3
- OSPFv3 Configuration Examples
- Troubleshooting OSPFv3 Configuration
- 10 IPv6 IS-IS Configuration
- 11 IPv6 BGP Configuration
- IPv6 BGP Overview
- Configuration Task List
- Configuring IPv6 BGP Basic Functions
- Prerequisites
- Specifying an IPv6 BGP Peer
- Injecting a Local IPv6 Route
- Configuring a Preferred Value for Routes from a Peer/Peer Group
- Specifying the Source Interface for Establishing TCP Connections
- Allowing the Establishment of a Non-Direct eBGP connection
- Configuring a Description for an IPv6 Peer/Peer Group
- Disabling Session Establishment to an IPv6 Peer/Peer Group
- Logging IPv6 Peer/Peer Group State Changes
- Controlling Route Distribution and Reception
- Prerequisites
- Configuring IPv6 BGP Route Redistribution
- Configuring IPv6 BGP Route Summarization
- Advertising a Default Route to an IPv6 Peer/Peer Group
- Configuring Outbound Route Filtering
- Configuring Inbound Route Filtering
- Configuring IPv6 BGP and IGP Route Synchronization
- Configuring Route Dampening
- Configuring IPv6 BGP Route Attributes
- Tuning and Optimizing IPv6 BGP Networks
- Configuring a Large Scale IPv6 BGP Network
- Displaying and Maintaining IPv6 BGP
- IPv6 BGP Configuration Examples
- Troubleshooting IPv6 BGP Configuration
- 12 Route Policy Configuration
- 13 Policy Routing Configuration
- 14 Index
| Recognized languages: | English |
|---|---|
| Pages: | 112 |
| Size: | 1.10 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 ACL Configuration
- 2 QoS Overview
- 3 QoS Configuration Approaches
- 4 Priority Mapping Configuration
- 5 Traffic Policing, Traffic Shaping, and Line Rate Configuration
- 6 Congestion Management Configuration
- 7 Congestion Avoidance
- 8 Traffic Filtering Configuration
- 9 Priority Marking Configuration
- 10 Traffic Redirecting Configuration
- 11 Aggregation CAR Configuration
- 12 Class-Based Accounting Configuration
- 13 QoS in an EPON System
- 14 Appendix A Default Priority Mapping Tables
- 15 Appendix B Introduction to Packet Precedences
- 16 Index
| Recognized languages: | English |
|---|---|
| Pages: | 430 |
| Size: | 4.50 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 Multicast Overview
- 2 IGMP Snooping Configuration
- IGMP Snooping Overview
- IGMP Snooping Configuration Task List
- Configuring Basic Functions of IGMP Snooping
- Configuring IGMP Snooping Port Functions
- Configuring IGMP Snooping Querier
- Configuring IGMP Snooping Proxying
- Configuring an IGMP Snooping Policy
- Configuration Prerequisites
- Configuring a Multicast Group Filter
- Configuring Multicast Source Port Filtering
- Configuring the Function of Dropping Unknown Multicast Data
- Configuring IGMP Report Suppression
- Configuring Maximum Multicast Groups that Can Be Joined on a Port
- Configuring Multicast Group Replacement
- Configuring 802.1p Precedence for IGMP Messages
- Displaying and Maintaining IGMP Snooping
- IGMP Snooping Configuration Examples
- Troubleshooting IGMP Snooping Configuration
- Appendix
- 3 Multicast VLAN Configuration
- Introduction to Multicast VLAN
- Multicast VLAN Configuration Task List
- Configuring Sub-VLAN-Based Multicast VLAN
- Configuring Port-Based Multicast VLAN
- Configuring the Maximum Number of Forwarding Entries in a Multicast VLAN
- Displaying and Maintaining Multicast VLAN
- Multicast VLAN Configuration Examples
- 4 Multicast Routing and Forwarding Configuration
- Multicast Routing and Forwarding Overview
- Configuration Task List
- Enabling IP Multicast Routing
- Configuring Multicast Routing and Forwarding
- Displaying and Maintaining Multicast Routing and Forwarding
- Configuration Examples
- Troubleshooting Multicast Routing and Forwarding
- 5 IGMP Configuration
- IGMP Overview
- IGMP Configuration Task List
- Configuring Basic Functions of IGMP
- Adjusting IGMP Performance
- Configuring IGMP SSM Mapping
- Configuring IGMP Proxying
- Displaying and Maintaining IGMP
- IGMP Configuration Examples
- Troubleshooting IGMP
- 6 PIM Configuration
- PIM Overview
- Configuring PIM-DM
- Configuring PIM-SM
- Configuring PIM-SSM
- Configuring PIM Common Features
- Displaying and Maintaining PIM
- PIM Configuration Examples
- Troubleshooting PIM Configuration
- 7 MSDP Configuration
- MSDP Overview
- MSDP Configuration Task List
- Configuring Basic Functions of MSDP
- Configuring an MSDP Peer Connection
- Configuring SA Messages Related Parameters
- Displaying and Maintaining MSDP
- MSDP Configuration Examples
- Troubleshooting MSDP
- 8 MBGP Configuration
- MBGP Overview
- Protocols and Standards
- MBGP Configuration Task List
- Configuring MBGP Basic Functions
- Controlling Route Advertisement and Reception
- Prerequisites
- Configuring MBGP Route Redistribution
- Configure Default Route Redistribution into MBGP
- Configuring MBGP Route Summarization
- Advertising a Default Route to an IPv4 MBGP Peer or Peer Group
- Configuring Outbound MBGP Route Filtering
- Configuring Inbound MBGP Route Filtering
- Configuring MBGP Route Dampening
- Configuring MBGP Route Attributes
- Tuning and Optimizing MBGP Networks
- Configuring a Large Scale MBGP Network
- Displaying and Maintaining MBGP
- MBGP Configuration Example
- 9 MLD Snooping Configuration
- MLD Snooping Overview
- MLD Snooping Configuration Task List
- Configuring Basic Functions of MLD Snooping
- Configuring MLD Snooping Port Functions
- Configuring MLD Snooping Querier
- Configuring MLD Snooping Proxying
- Configuring an MLD Snooping Policy
- Configuration Prerequisites
- Configuring an IPv6 Multicast Group Filter
- Configuring IPv6 Multicast Source Port Filtering
- Configuring Dropping Unknown IPv6 Multicast Data
- Configuring MLD Report Suppression
- Configuring Maximum Multicast Groups that Can Be Joined on a Port
- Configuring IPv6 Multicast Group Replacement
- Configuring 802.1p Precedence for MLD Messages
- Displaying and Maintaining MLD Snooping
- MLD Snooping Configuration Examples
- Troubleshooting MLD Snooping
- Appendix
- 10 IPv6 Multicast VLAN Configuration
- Introduction to IPv6 Multicast VLAN
- IPv6 Multicast VLAN Configuration Task List
- Configuring IPv6 Sub-VLAN-Based IPv6 Multicast VLAN
- Configuring Port-Based IPv6 Multicast VLAN
- Configuring the Maximum Number of Forwarding Entries in IPv6 Multicast VLANs
- Displaying and Maintaining IPv6 Multicast VLAN
- IPv6 Multicast VLAN Configuration Examples
- 11 IPv6 Multicast Routing and Forwarding Configuration
- IPv6 Multicast Routing and Forwarding Overview
- Configuration Task List
- Enabling IPv6 Multicast Routing
- Configuring IPv6 Multicast Routing and Forwarding
- Displaying and Maintaining IPv6 Multicast Routing and Forwarding
- Troubleshooting IPv6 Multicast Policy Configuration
- 12 MLD Configuration
- MLD Overview
- Configuration Task List
- Configuring Basic Functions of MLD
- Adjusting MLD Performance
- Configuring MLD SSM Mapping
- Configuring MLD Proxying
- Displaying and Maintaining MLD Configuration
- MLD Configuration Examples
- Troubleshooting MLD
- 13 IPv6 PIM Configuration
- IPv6 PIM Overview
- Configuring IPv6 PIM-DM
- Configuring IPv6 PIM-SM
- Configuring IPv6 PIM-SSM
- Configuring IPv6 PIM Common Features
- Displaying and Maintaining IPv6 PIM
- IPv6 PIM Configuration Examples
- Troubleshooting IPv6 PIM Configuration
- 14 IPv6 MBGP Configuration
- IPv6 MBGP Overview
- IPv6 MBGP Configuration Task List
- Configuring IPv6 MBGP Basic Functions
- Controlling Route Distribution and Reception
- Configuration Prerequisites
- Injecting a Local IPv6 MBGP Route
- Configuring IPv6 MBGP Route Redistribution
- Configuring IPv6 MBGP Route Summarization
- Advertising a Default Route to a Peer or Peer Group
- Configure Outbound IPv6 MBGP Route Filtering
- Configuring Inbound IPv6 MBGP Route Filtering
- Configuring IPv6 MBGP Route Dampening
- Configuring IPv6 MBGP Route Attributes
- Tuning and Optimizing IPv6 MBGP Networks
- Configuring a Large Scale IPv6 MBGP Network
- Displaying and Maintaining IPv6 MBGP
- IPv6 MBGP Configuration Example
- 15 Index
| Recognized languages: | English |
|---|---|
| Pages: | 334 |
| Size: | 3.74 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 MCE Overview
- MCE Overview
- Routing Information Exchange for MCE
- MCE Configuration
- Configuring a VPN Instance
- Configuring Route Exchange between a MCE and a Site
- Configuring Route Exchange between a MCE and a Site
- Configuring to Use Static Routes between a MCE and a Site
- Configuring to Use RIP between a MCE and a Site
- Configuring to Use OSPF between a MCE and a Site
- Configuring to Use IS-IS between a MCE and a Site
- Configuring to Use EBGP between a MCE and a Site
- Configuring Route Exchange between a MCE and a PE
- Displaying and Maintaining MCE
- MCE Configuration Example
- 2 MPLS Basics Configuration
- MPLS Overview
- MPLS Configuration Task List
- Enabling the MPLS Function
- Configuring a Static LSP
- Establishing Dynamic LSPs through LDP
- Configuring MPLS LDP Capability
- Configuring Local LDP Session Parameters
- Configuring Remote LDP Session Parameters
- Configuring PHP
- Configuring the Policy for Triggering LSP Establishment
- Configuring the Label Distribution Control Mode
- Configuring LDP Loop Detection
- Configuring LDP MD5 Authentication
- Configuring LDP Label Filtering
- Maintaining LDP Sessions
- Managing and Optimizing MPLS Forwarding
- Configuring MPLS Statistics
- Inspecting LSPs
- Enabling MPLS Trap
- Displaying and Maintaining MPLS
- MPLS Configuration Examples
- 3 MPLS TE Configuration
- MPLS TE Overview
- MPLS TE Configuration Task List
- Configuring MPLS TE Basic Capabilities
- Creating MPLS TE Tunnel over Static CR-LSP
- Configuring MPLS TE Tunnel with Dynamic Signaling Protocol
- Configuring RSVP-TE Advanced Features
- Tuning CR-LSP Setup
- Tuning MPLS TE Tunnel Setup
- Configuring Traffic Forwarding
- Configuring Traffic Forwarding Tuning Parameters
- Configuring CR-LSP Backup
- Configuring FRR
- Inspecting an MPLS TE Tunnel
- Displaying and Maintaining MPLS TE
- MPLS TE Configuration Examples
- Troubleshooting MPLS TE
- 4 VPLS Configuration
- VPLS Overview
- VPLS Configuration Task List
- Configuring LDP VPLS
- Configuring BGP VPLS
- Configuring VPLS Instance Attributes
- Displaying and Maintaining VPLS
- VPLS Configuration Examples
- Troubleshooting VPLS
- 5 MPLS L2VPN Configuration
- MPLS L2VPN Overview
- MPLS L2VPN Configuration Task List
- Configuring MPLS L2VPN
- Configuring a PE Interface Connecting a CE
- Configuring CCC MPLS L2VPN
- Configuring SVC MPLS L2VPN
- Configuring Martini MPLS L2VPN
- Configuring Kompella MPLS L2VPN
- Displaying and Maintaining MPLS L2VPN
- MPLS L2VPN Configuration Examples
- Troubleshooting MPLS L2VPN
- 6 MPLS L3VPN Configuration
- MPLS L3VPN Overview
- MPLS L3VPN Configuration Task List
- Configuring VPN Instances
- Configuring Basic MPLS L3VPN
- Configuring Inter-Provider VPN
- Configuring Nested VPN
- Configuring HoVPN
- Configuring OSPF Sham Link
- Configuring BGP AS Number Substitution
- Displaying and Maintaining MPLS L3VPN
- MPLS L3VPN Configuration Examples
- Example for Configuring MPLS L3VPNs
- Example for Configuring Inter-Provider VPN Option A
- Example for Configuring Inter-Provider VPN Option B
- Example for Configuring Inter-Provider VPN Option C
- Example for Configuring Carrier’s Carrier
- Example for Configuring Nested VPN
- Example for Configuring HoVPN
- Example for Configuring OSPF Sham Links
- Example for Configuring BGP AS Number Substitution
- 7 Index
| Recognized languages: | English |
|---|---|
| Pages: | 211 |
| Size: | 1.85 MB |
Show table of contents
Read manual
Document Outline
- Title Page.pdf
- Preface.pdf
- Table of Contents
- 1 High Availability Overview
- 2 Active and Standby Switchover Configuration
- 3 Ethernet OAM Configuration
- 4 Extended OAM Configuration
- 5 CFD Configuration
- 6 DLDP Configuration
- Overview
- DLDP Configuration Task List
- Enabling DLDP
- Setting DLDP Mode
- Setting the Interval for Sending Advertisement Packets
- Setting the DelayDown Timer
- Setting the Port Shutdown Mode
- Configuring DLDP Authentication
- Resetting DLDP State
- Displaying and Maintaining DLDP
- DLDP Configuration Examples
- Troubleshooting DLDP
- 7 RRPP Configuration
- RRPP Overview
- RRPP Configuration Task List
- Creating an RRPP Domain
- Configuring Control VLANs
- Configuring Protected VLANs
- Configuring RRPP Rings
- Activating an RRPP Domain
- Configuring RRPP Timers
- Configuring RRPP Fast Detection
- Configuring an RRPP Ring Group
- Displaying and Maintaining RRPP
- RRPP Configuration Examples
- Troubleshooting
- 8 Smart Link Configuration
- Smart Link Overview
- Smart Link Configuration Task List
- Configuring a Smart Link Device
- Configuring an Associated Device
- Displaying and Maintaining Smart Link
- Smart Link Configuration Examples
- 9 Monitor Link Configuration
- 10 VRRP Configuration
- VRRP Overview
- VRRP Standard Protocol Mode
- Configuring VRRP for IPv4
- VRRP for IPv4 Configuration Task List
- Specifying the Type of MAC Addresses Mapped to Virtual IP Addresses
- Creating a VRRP Group and Configuring Virtual IP Address
- Configuring Router Priority, Preemptive Mode and Tracking Function
- Configuring VRRP Packet Attributes
- Enabling the Trap Function for VRRP
- Displaying and Maintaining VRRP for IPv4
- Configuring VRRP for IPv6
- VRRP for IPv6 Configuration Task List
- Specifying the Type of MAC Addresses Mapped to Virtual IPv6 Addresses
- Creating a VRRP Group and Configuring a Virtual IPv6 Address
- Configuring Router Priority, Preemptive Mode and Tracking Function
- Configuring VRRP Packet Attributes
- Displaying and Maintaining VRRP for IPv6
- IPv4-Based VRRP Configuration Examples
- IPv6-Based VRRP Configuration Examples
- Troubleshooting VRRP
- 11 BFD Configuration
- 12 Track Configuration
- Track Overview
- Track Configuration Task List
- Configuring Collaboration Between the Track Module and the Detection Modules
- Configuring Collaboration Between the Track Module and the Application Modules
- Displaying and Maintaining Track Entries
- Track Configuration Examples
- VRRP-Track-NQA Collaboration Configuration Example (The Master Monitors the Uplink)
- Configuring BFD for a VRRP Backup to Monitor the Master
- Configuring BFD for the VRRP Master to Monitor the Uplinks
- Static Routing-Track-NQA Collaboration Configuration Example
- Static Routing-Track-BFD Collaboration Configuration Example
- VRRP-Track-Interface Management Collaboration Configuration Example (The Master Monitors the Uplink Interface)
- 13 Index
| Recognized languages: | English |
|---|---|
| Pages: | 22 |
| Size: | 207 KB |
Show table of contents
Read manual
Document Outline
- Title Page.pdf
- Preface.pdf
- 12 OAA Configuration Guide.pdf
| Recognized languages: | English |
|---|---|
| Pages: | 31 |
| Size: | 297 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 37 |
| Size: | 297 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 269 |
| Size: | 3.16 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 AAA Overview
- 2 AAA Configuration
- AAA Configuration Considerations and Task List
- Configuring AAA Schemes
- Configuring Local Users
- Configuring RADIUS Schemes
- RADIUS scheme configuration task list
- Creating a RADIUS scheme
- Specifying the RADIUS authentication/authorization servers
- Specifying the RADIUS accounting servers and relevant parameters
- Setting the shared keys for RADIUS packets
- Setting the maximum number of RADIUS request transmission attempts
- Setting the supported RADIUS server type
- Setting the status of RADIUS servers
- Configuring attributes for data to be sent to the RADIUS servers
- Specifying the source IP address for RADIUS packets to be sent
- Setting timers for controlling communication with RADIUS servers
- Specifying a security policy server
- Configuring interpretation of RADIUS class attribute as CAR parameters
- Enabling the RADIUS trap function
- Enabling the listening port of the RADIUS client
- Displaying and maintaining RADIUS
- Configuring HWTACACS Schemes
- HWTACACS configuration task list
- Creating an HWTACACS scheme
- Specifying the HWTACACS authentication servers
- Specifying the HWTACACS authorization servers
- Specifying the HWTACACS accounting servers
- Setting the shared keys for HWTACACS packets
- Configuring attributes for data to be sent to the HWTACACS servers
- Specifying the source IP address for HWTACACS packets to be sent
- Setting timers for controlling communication with HWTACACS servers
- Displaying and maintaining HWTACACS
- Configuring AAA Methods for ISP Domains
- Tearing Down User Connections Forcibly
- Configuring a NAS ID-VLAN Binding
- Displaying and Maintaining AAA
- 3 AAA Configuration Examples
- AAA Configuration Examples
- AAA for Telnet Users by an HWTACACS Server
- AAA for Telnet Users by Separate Servers
- Authentication/Authorization for SSH/Telnet Users by a RADIUS Server
- AAA for Portal Users by a RADIUS Server
- AAA for 802.1X Users by a RADIUS Server
- Level Switching Authentication for Telnet Users by an HWTACACS Server
- AAA Configuration Examples
- 4 Troubleshooting AAA
- 5 802.1X Configuration
- 802.1X Overview
- 802.1X Configuration
- Configuration Prerequisites
- 802.1X Configuration Task List
- Enabling 802.1X on a Port
- Specifying the Authentication Method of 802.1X Users
- Specifying the Port Authorization Mode
- Specifying the Access Control Method
- Configuring the Maximum Number of Users Accessible to a Port
- Setting the Maximum Number of Attempts for Sending an Authentication Request
- Setting 802.1X Timers
- Configuring the Online User Handshake Function
- Enabling the Proxy Detection Function
- Enabling the Multicast Trigger Function
- Enabling the Unicast Trigger Function
- Specifying a Mandatory Authentication Domain for a Port
- Enabling the Quiet Timer
- Enabling the Re-Authentication Function
- Configuring a Guest VLAN
- Configuring an Auth-Fail VLAN
- Displaying and Maintaining 802.1X
- 802.1X Configuration Examples
- 6 802.1X-Based EAD Fast Deployment Configuration
- 7 MAC Authentication Configuration
- MAC Authentication Overview
- MAC Authentication Timers
- Features Used Together with MAC Authentication
- MAC Authentication Configuration Task List
- Basic Configuration for MAC Authentication
- Specifying a Domain for MAC Authentication Users
- Displaying and Maintaining MAC Authentication
- MAC Authentication Configuration Examples
- 8 Portal Configuration
- Portal Overview
- Portal Configuration Task List
- Basic Portal Configuration
- Configuring a Portal-Free Rule
- Configuring an Authentication Subnet
- Specifying the Source IP Address for Portal Packets to Be Sent
- Logging out Users
- Specifying the Authentication Domain for Portal Users
- Specifying a NAS ID Profile for an Interface
- Setting the Maximum Number of Online Portal Users
- Displaying and Maintaining Portal
- Portal Configuration Examples
- Configuring Direct Portal Authentication
- Configuring Re-DHCP Portal Authentication
- Configuring Layer 3 Portal Authentication
- Configuring Direct Portal Authentication with Extended Functions
- Configuring Re-DHCP Portal Authentication with Extended Functions
- Configuring Layer 3 Portal Authentication with Extended Functions
- Troubleshooting Portal
- 9 Port Security Configuration
- Introduction to Port Security
- Port Security Configuration Task List
- Enabling Port Security
- Setting the Maximum Number of Secure MAC Addresses
- Setting the Port Security Mode
- Configuring Port Security Features
- Configuring Secure MAC Addresses
- Ignoring Authorization Information from the Server
- Displaying and Maintaining Port Security
- Port Security Configuration Examples
- Troubleshooting Port Security
- 10 User Profile Configuration
- 11 Public Key Configuration
- SSH2.0 Configuration
- SSH2.0 Overview
- Configuring the Device as an SSH Server
- Configuring the Device as an SSH Client
- Displaying and Maintaining SSH
- SSH Server Configuration Examples
- SSH Client Configuration Examples
- 12 SFTP Configuration
- 13 IP Source Guard Configuration
- IP Source Guard Overview
- Configuring a Static IP Source Guard Entry
- Configuring the Dynamic IP Source Guard Binding Function
- Displaying and Maintaining IP Source Guard
- IP Source Guard Configuration Examples
- Troubleshooting IP Source Guard
- 14 ARP Attack Protection Configuration
- ARP Attack Protection Overview
- ARP Attack Protection Configuration Task List
- Configuring ARP Defense Against IP Packet Attacks
- Configuring ARP Active Acknowledgement
- Configuring Source MAC Address Based ARP Attack Detection
- Configuring ARP Packet Rate Limit
- Configuring ARP Detection
- Introduction
- Configuring ARP Detection Based on Specified Objects
- Enabling ARP Detection Based on Static IP Source Guard Binding Entries/DHCP Snooping Entries/802.1X Security Entries/OUI MAC Addresses
- Displaying and Maintaining ARP Detection
- ARP Detection Configuration Example I
- ARP Detection Configuration Example II
- 15 URPF Configuration
- 16 Index
| Recognized languages: | English |
|---|---|
| Pages: | 208 |
| Size: | 2.02 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 System Maintaining and Debugging
- 2 NQA Configuration
- NQA Overview
- NQA Configuration Task List
- Configuring the NQA Server
- Enabling the NQA Client
- Creating an NQA Test Group
- Configuring an NQA Test Group
- Configuring the Collaboration Function
- Configuring Trap Delivery
- Configuring the NQA Statistics Function
- Configuring the History Records Saving Function
- Configuring Optional Parameters Common to an NQA Test Group
- Scheduling an NQA Test Group
- Displaying and Maintaining NQA
- NQA Configuration Examples
- ICMP Echo Test Configuration Example
- DHCP Test Configuration Example
- DNS Test Configuration Example
- FTP Test Configuration Example
- HTTP Test Configuration Example
- UDP Jitter Test Configuration Example
- SNMP Test Configuration Example
- TCP Test Configuration Example
- UDP Echo Test Configuration Example
- Voice Test Configuration Example
- DLSw Test Configuration Example
- NQA Collaboration Configuration Example
- 3 NTP Configuration
- NTP Overview
- NTP Configuration Task List
- Configuring the Operation Modes of NTP
- Configuring the Local Clock as a Reference Source
- Configuring Optional Parameters of NTP
- Configuring Access-Control Rights
- Configuring NTP Authentication
- Displaying and Maintaining NTP
- NTP Configuration Examples
- Configuring NTP Client/Server Mode
- Configuring the NTP Symmetric Mode
- Configuring NTP Broadcast Mode
- Configuring NTP Multicast Mode
- Configuring NTP Client/Server Mode with Authentication
- Configuring NTP Broadcast Mode with Authentication
- Configuring MPLS VPN Time Synchronization in Client/server Mode
- Configuring MPLS VPN Time Synchronization in Symmetric Peers Mode
- 4 IPC Configuration
- 5 PoE Configuration
- PoE Overview
- PoE Configuration Task List
- Enabling PoE
- Detecting PDs
- Configuring the PoE Power
- Configuring PoE Power Management
- Configuring the PoE Monitoring Function
- Configuring PoE Interface through PoE Profile
- Upgrading PSE Processing Software in Service
- Displaying and Maintaining PoE
- PoE Configuration Example
- Troubleshooting PoE
- 6 SNMP Configuration
- 7 MIB Style Configuration
- 8 RMON Configuration
- 9 Port Mirroring Configuration
- Introduction to Port Mirroring
- Configuring Local Port Mirroring
- Configuring Layer 2 Remote Port Mirroring
- Configuring Layer 3 Remote Port Mirroring
- Configuring Local Port Mirroring for an ONU
- Displaying and Maintaining Port Mirroring
- Port Mirroring Configuration Examples
- 10 Traffic Mirroring Configuration
- 11 sFlow Configuration
- 12 Information Center Configuration
- Information Center Overview
- Configuring Information Center
- Information Center Configuration Task List
- Outputting System Information to the Console
- Outputting System Information to a Monitor Terminal
- Outputting System Information to a Log Host
- Outputting System Information to the Trap Buffer
- Outputting System Information to the Log Buffer
- Outputting System Information to the SNMP Module
- Saving System Information to a Log File
- Configuring Synchronous Information Output
- Disabling a Port from Generating Link Up/Down Logging Information
- Displaying and Maintaining Information Center
- Information Center Configuration Examples
- 13 Index
| Recognized languages: | English |
|---|---|
| Pages: | 349 |
| Size: | 15.39 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- CLI configuration
- What is CLI?
- Entering the CLI
- Command conventions
- Undo form of a command
- CLI views
- Using the CLI online help
- Typing commands
- Checking command-line errors
- Using command history
- Controlling the CLI display
- Configuring user privilege and command levels
- Saving the current configuration
- Displaying and maintaining CLI
- Login methods
- CLI login
- Overview
- Logging in through the console port
- Introduction
- Configuration requirements
- Login procedure
- Console login authentication modes
- Configuring none authentication for console login
- Configuring password authentication for console login
- Configuring scheme authentication for console login
- Configuring common settings for console login (optional)
- Logging in through telnet
- Introduction
- Telnet login authentication modes
- Configuring none authentication for telnet login
- Configuring password authentication for telnet login
- Configuring scheme authentication for telnet login
- Configuring common settings for VTY user interfaces (optional)
- Configuring the SecBlade card to log in to a telnet server as a telnet client
- Displaying and maintaining CLI login
- Logging in to the SecBlade NS card from the host device
- NMS login
- User login control
- User login control overview
- Configuring login control over telnet users
- Configuring source IP-based login control over NMS users
- Interface configuration
- Ethernet interface overview
- General configuration
- Configuring a combo interface
- Configuring basic settings of an Ethernet interface or subinterface
- Shutting down an Ethernet interface or subinterface
- Configuring flow control on an Ethernet interface
- Configuring loopback testing on an Ethernet interface
- Configuring the link mode of an Ethernet interface
- Configuring a Layer 2 Ethernet interface or subinterface
- Configuring a Layer 3 Ethernet interface or subinterface
- Displaying and maintaining an Ethernet interface or subinterface
- Configuring a loopback interface
- Configuring the null interface
- Displaying and maintaining loopback and null interfaces
- IP addressing configuration
- IP routing basics configuration
- Static routing configuration
- Policy-based routing configuration
- VLAN configuration
- Isolate-user-VLAN configuration
- Layer 2 forwarding configuration
- Configuring general Layer 2 forwarding
- Configuring inline Layer 2 forwarding
- Configuring inter-VLAN Layer 2 forwarding
- MAC address table configuration
- ARP configuration
- Gratuitous ARP configuration
- Proxy ARP configuration
- ACL configuration
- NetStream overview
- IPv4 NetStream configuration
- IPv4 NetStream configuration task list
- Enabling IPv4 NetStream
- Configuring IPv4 NetStream filtering and sampling
- Configuring IPv4 NetStream data export
- Configuring attributes of IPv4 NetStream export data
- Configuring IPv4 NetStream flow aging
- Enabling DSA-TAG field parsing
- Displaying and maintaining IPv4 NetStream
- IPv6 NetStream configuration
- NetStream configuration examples
- Configuration considerations
- Configuring the host device and the SecBlade NS card
- IPv4 NetStream traditional data export configuration example
- IPv4 NetStream aggregation data export configuration example
- Using the sampler for IPv4 NetStream
- IPv6 NetStream traditional data export configuration example
- IPv6 NetStream aggregation data export configuration example
- Device management
- Device management overview
- Configuring the device name
- Configuring and displaying the system time
- Enabling the display of copyright information
- Configuring banners
- Configuring the maximum number of concurrent users
- Configuring the exception handling method
- Rebooting the device
- Configuring a scheduled task
- Configuring temperature alarm thresholds for a card
- Clearing the 16-bit interface indexes not used in the current system
- Identifying and diagnosing pluggable transceivers
- Displaying and maintaining device management
- NTP configuration
- Automatic configuration
- Introduction to automatic configuration
- Typical automatic configuration network
- How automatic configuration works
- FTP configuration
- FTP overview
- Configuring the FTP client
- Configuring the FTP server
- Displaying and maintaining FTP
- TFTP configuration
- File management
- Configuration file management
- Configuration file overview
- Saving the running configuration
- Setting configuration rollback
- Specifying a startup configuration file to be used at the next system startup
- Backing up the startup configuration file
- Deleting a startup configuration file to be used at the next startup
- Restoring a startup configuration file
- Displaying and maintaining a configuration file
- Software upgrade configuration
- Device software overview
- Software upgrade methods
- Software upgrade through a system reboot
- Software upgrade by installing hotfixes
- Displaying and maintaining software upgrade
- Software upgrade configuration examples
- System maintenance and debugging
- Information center configuration
- Information center overview
- Configuring information center
- Information center configuration task list
- Outputting system information to the console
- Outputting system information to a monitor terminal
- Outputting system information to a log host
- Outputting system information to the trap buffer
- Outputting system information to the log buffer
- Outputting system information to the SNMP module
- Outputting system information to the web interface
- Saving system information to a log file
- Managing security logs files
- Configuring synchronous information output
- Disabling a port from generating link up/down logging information
- Displaying and maintaining information center
- Information center configuration examples
- SNMP configuration
- MIB style configuration
- RMON configuration
- H3C network technology acronyms
- Index