H3C Technologies H3C SR6600 - Manual (Page 12)

2-9
Feature
Operation and command
manual
Feature description
L2TP
L2TP Configuration
L2TP Commands
Defines an encapsulation mechanism for transporting
multiprotocol packets over Layer 2 (L2) point-to-point
links
z
LAC configuration
z
LNS configuration
Return to Feature Index .
QoS Volume
Table 2-6 Features in QoS volume
Feature
Operation and command
manual
Feature description
QoS
QoS Configuration
QoS Commands
Quality of service, evaluates the service performance
for those network core requirements during packet
transmission process, such as: delay, jitter and packet
loss ratio.
Peak rate and hardware queues are not supported.
z
Traffic classification, policing, and shaping
z
QoS policy configuration
z
Congestion management
z
Congestion avoidance
z
MPLS QoS configuration
FR QoS
FR QoS Configuration
FR QoS Commands
On a FR interface, you can use general QoS services
to provide the services such as TP, TS, congestion
management, and congestion avoidance.
Return to Feature Index .
Security Volume
Table 2-7 Features in security volume
Feature
Operation and command
manual
Feature description
AAA
AAA Configuration
AAA Commands
Authentication, authorization and accounting
(AAA) provide a uniform framework used for
configuring these three security functions to
implement the network security management.
z
AAA configuration
z
RADIUS configuration
z
HWTACACS configuration
Firewall
Firewall Configuration
Firewall Commands
Firewall can prevent unauthorized or
unauthenticated users on the Internet from
accessing a protected network while allowing
the users on the internal network to access web
sites on the Internet and transceive E-mails.
z
Configuring a packet filter firewall
z
Configuring an ASPF