H3C Technologies H3C SR6600 - Manual (Page 8)

2-5
Feature
Operation and command
manual
Feature description
IPv6 Basics
IPv6 Basics Configuration
IPv6 Basics Commands
Internet protocol version 6 (IPv6) was designed by
the Internet Engineering Task Force (IETF) as the
successor to Internet protocol version 4 (IPv4).
z
Configuring basic IPv6 functions
z
IPv6 NDP configuration
z
PMTU discovery configuration
z
TCP6 configuration
z
IPv6 FIB forwarding configuration
z
Configuring the maximum ICMPv6 error packets
sent in an interval
z
IPv6 DNS configuration
Adjacency
Table
Adjacency Table
Configuration
Adjacency Table
Commands
An adjacency table manages the information on the
neighbors that are both connected and active.
Flow
Classification
Flow Classification
Configuration
Flow Classification
Commands Flow classification organizes packets with different
characteristics into different classes using certain
match criteria. It is the basis for providing
differentiated services.
IP Virtual
Fragment
Reassembly
IP Virtual Fragment
Reassembly Configuration
IP Virtual Fragment
Reassembly Commands
To prevent each service module (such as IPsec,
NAT and firewall) from processing packet
fragments that do not arrive in order, you can
enable the virtual fragment reassembly feature,
which can virtually reassemble the fragments of a
datagram through fragment check, sequencing and
caching, ensuring fragments arriving at each
service module is in order.
Dual Stack Dual Stack Configuration
A network node that supports both IPv4 and IPv6 is
called a dual stack node. A dual stack node
configured with an IPv4 address and an IPv6
address can have both IPv4 and IPv6 packets
transmitted.
z
Dual stack configuration
Tunneling
Tunneling Configuration
Tunneling Commands
Tunneling is an encapsulation technology, which
utilizes one network protocol to encapsulate
packets of another network protocol and transfer
them over the network. Tunneling refers to the
whole process from data encapsulation to data
transfer to data de-encapsulation.
z
IPv6 manual tunnel configuration
z
Automatic IPv4-compatible IPv6 tunnel
configuration
z
6to4 tunnel configuration
z
ISATAP tunnel configuration
z
IPv4 in IPv4 tunnel configuration
z
IPv6 in IPv6 tunnel configuration
z
IPv4 in IPv6 tunnel configuration
z
6PE configuration
UDP Helper
UDP Helper Configuration
UDP Helper Commands
UDP Helper functions as a relay agent that converts
UDP broadcast packets into unicast packets and
forwards them to a specified destination server.
z
Introduction to UDP Helper
z
UDP Helper configuration