H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 100
86
•
Add a service named Dot1x auth, and set the service suffix to bbb, the authentication domain for
the 802.1X user. With the service suffix configured, you must configure the access device to send
usernames that carry domain names to the RADIUS server.
•
Select UserAcct as the charging plan.
•
Select EAP as the certificate authentication method.
•
Select EAP-PEAP AuthN as the certificate type, and select MS-CHAPv2 AuthN as the certificate
subtype.
•
Select Deploy VLAN and set the ID of the VLAN to be assigned to 4.
•
Configure other parameters as needed.
•
Click OK to finish the configuration.
Figure 44 Adding a service
# Add a user.
Click the User tab, and select Access User View > All Access Users from the navigation tree to enter the
All Access Users page. Then, click Add to configure a user as follows:
•
Select the user or add a user named hello
•
Specify the account name as dot1x and configure the password
•
Select the access service Dot1x auth
•
Configure other parameters as needed and click OK to finish the configuration