H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 83)

69
Figure 20 Adding a charging policy
# Add a service.
Select the Service tab, and select Access Service > Service Configuration from the navigation tree to enter
the Service Configuration page. Then, click Add to enter the Add Service Configuration page and
perform the following configurations as shown in
Figure 21 :
• Add a service named Portal-auth/acct and set the Service Suffix to dm1, which indicates the
authentication domain for the portal user. With the service suffix configured, you must configure the
usernames to be sent to the RADIUS server to carry the domain name.
• Specify UserAcct as the Charging Plan.
• Configure other parameters according to the actual situation.
• Click OK to finish the operation.
Figure 21 Adding a service
# Add a user.