H3C Technologies H3C Intelligent Management Center - Manual (Page 46)

39
Figure 27 Batch deploy succeeded
4. Perform either of the following operations:
{
To start IMC immediately, select Start IMC Server now and click OK.
{
To start IMC later, clear the Start IMC Server now option and click OK. Then, when you are
ready to start IMC, click Start IMC on the Monitor tab of the Intelligent Deployment Monitoring
Agent.
5. Click the Deploy tab in the Intelligent Deployment Monitoring Agent.
Network Behavior Analyzer Server and Network Traffic Analyzer Server can be deployed on the
master server and a subordinate server at the same time. When they are deployed in centralized
mode, an entry with Undeployed status appears in the deployment entry list, as shown in Figure
29 .
Figure 28 Information about component deployment