Figure 47 – H3C Technologies H3C Intelligent Management Center User Manual
Page 62
Advertising
55
Figure 46 Batch deploy
4.
Select the subcomponents you want to deploy. In this example, select all the subcomponents and
click OK.
5.
In the Please Choose L2VPN Global Parameter Operate window (see
), configure the
L2VPN parameters as needed. This example uses the default values of the parameters.
If BGP(Boarder Gateway Protocol) is selected for VPLS(Virtual private LAN service), VLL(virtual
leased line) and PBB(provider backbone bridge) options are automatically cleared.
Advertising