H3C Technologies H3C Intelligent Management Center - Manual (Page 73)

63
4. Click OK.
Modifying a meter
Use the meter management function to modify the flags and the bands.
To access the Modify OF Meter page:
1. Access the meter list page.
2. Click the Modify icon for the meter to modify.
The Modify OF Meter page appears.
Modifying the flags
Select or clear the flags for the meter. Options are:
• KBPS
• PKTPS
• BURST
• STATS
Modifying the bands
There are several ways to modify bands, including adding a new band and modifying or deleting an
existing band.
Adding a band
1. In the Bands area, click Add.
The Add Band window appears.
2. Specify the following parameters:
{
Rate—Enter a rate value for the band.
{
Burst Size—Enter a burst size value for the band.
{
Band Type—Select a band type from the list. Options are:
− Drop—Drop the packets.
− DSCP Remark—Modify the drop precedence of the DSCP field in the IP header of the
packets. The Precedence Level field is required.
3. Click OK.
Modifying a band
1. In the band list, click the Modify icon for the band to modify.
The Modify Band window appears.
2. Modify the following parameters:
{
Rate—Enter a new rate value for the band.
{
Burst Size—Enter a new burst size value for the band.
{
Band Type—Select a band type from the list. Options are: