Saving settings – Grass Valley Acappella v.3.2.4 User Manual
Page 97
Acappella — Instruction Manual
97
Acappella Configuration Pages
System Identifier:
Leave this setting to
Default
on an Acappella system running on its own net-
work.
If your Acappella system is running on a network shared by Prelude or
Encore systems, you can isolate them from one another by assigning dif-
ferent ports for each system, using the System Identifier buttons. See
for an explanation of this feature.
Note
All components on an individual system must use the same System Identifier
(port) number.
System Broadcast Select:
Leave this setting at
Use Broadcast
if your Acappella system has none or only
a small number of remote panels (three or less).
Selecting
Use Multicast
makes this Acappella device employ a more efficient
networking mechanism, useful for systems with several remote panels.
Note
All components on an individual system must use the same Broadcast set-
tings.
Saving Settings
You must select
Do Reset
and click on
Save New Settings
before any changes
made to this page will take effect. Remember that all components of a spe-
cific system must have the same port settings, so if you change this you
must change all the others components to match.