Grass Valley 1-CCD CameraMan Rev.D1 - Manual (Page 8)

Page 5
Maximum Pan/Tilt Configuration
Now that you’ve learned how to program the pan arrows to meet your application’s needs, you can continue to customize how
your Camera Control Keypad works with your CameraMan system.
Maximum Pan/Tilt Travel
Once the CameraMan Camera is installed, you can configure the PAN/TILT settings to suit
your application. The CameraMan camera has a maximum pan range of 359°, but comes
programmed with factory default settings for maximum pan/tilt settings of ±90° of PAN and ±
25° of TILT. Use the following procedure to change the maximum position settings:
1. Select the camera you want to adjust (see page 6, Multiple Camera Keypad Usage).
2. Press and hold the ENTER button.
3. While holding the ENTER button, use the PAN/TILT arrows to move the camera to the
maximum desired position in one direction.
4. Release the ENTER button to set the maximum desired position for that direction.
5. Listen for two beeps, indicating that the maximum position for that direction
has been set.
6. If desired, repeat steps 2-5 until all maximum positions (left, right, up and down) are set.
7. If desired, repeat steps 1-6 for additional cameras.
180° Default Maximum Pan Settings 50° Default Maximum Tilt Settings 359° Maximum Pan Range
Configure Your Camera Control Keypad