Grass Valley CopperHead Pro - Manual (Page 38)

32
CopperHead System Components
PowerPlus 3000 - Camera Power Adaptor
Fig. 3-23: PowerPlus 3000 Connectors
• 7: Heat Sink
• LP- Low Profile Heat Sink rated for 100 Watts (shown)
• HP - High Profile Heat Sink rated for 150 Watts
• 8: 12 Volt Auxiliary Output: 4-Pin XLR output connector for 12 Volt accessories
• 9: 24 Volt Auxiliary Output B: 3-pin connector for 24 Volt accessories.
• 10: 24 Volt Auxiliary Output A: 3-pin connector for 24 Volt accessories.
• 11: Tactical Fiber Dongle: fixed tactical fiber cable connects to the CopperHead
Camera Unit.
• 12: SMPTE Swivel: adjustable swivel for SMPTE 304M receptacle am.
• 13: SMPTE 304M Hybrid Fiber Receptacle: connect the SMPTE hybrid cable here. This
cable connects to the PowerPlus.
• 14: Tactical Fiber Connector (MX shown): dry fiber connector at the end of the
dongle. This should match the connector on the swivel of the mating CopperHead
Camera Unit. Available with the following termination:
• MX plug (shown)
• OpticalCON Connector ("dry")
• SMPTE 304M plug ("dry")