Grass Valley DD35 Family v.3.4.5 - Manual (Page 49)

Supplement Software Release V3.4.5 DD35 Production Switcher
45 Operating Instructions – Rev. 0 / 7.2002
Your choice is now: (buttons in the bottom row)
Restore: You will re–establish your ”triple”, steeling channel 3 from
”Pair 3/4”. All your keyframes are still available.
New: The workbuffer architecture is set to ”unused” for all channels
(”unused” means the workbuffer does not touch any channel, you
will not disturb any recalled effect) and you can set the architecture
of your choice.
Note:
The keyframes in a channel are not deleted when the architecture is set to
”unused”. This allows you to change the architecture without loosing
keyframe contents. When you want to start from scratch in a channel, select
the channel and press ”Delete / Del All”.
Display channel select mode:
In the edit menu paramaters can only be displayed for one channel at a time. You
can select more than one channel to be controlleded simultaneously.
Allow display of a not controlled channel
In this mode the displayed channel is only changed when a
channel is double clicked or when you click on the DVX name. It is possible e.g.
to control channel 1 only, having channel 2 displayed. You control a channel – but
displayed paramters do not change
Force display to a controlling channel
In this mode the displayed channel is automatically changed to a controlling
channel when the displayed channel is no longer controlled. When you control a
channel you always see the change in the parameters.
Channel 1 ... 4 source recall with DVx effects: Yes / No
If no, recalling or playing an effect does not recall the sources stored per keyframe
for the according channel (same as ”no x–point chan 1 ... 4” on DVx Main page).
Tip