2 installation of base station in rack – Grass Valley LDK 5417 User Manual
Page 30
LDK 5417 + LDK 4417 User’s Guide | Base Station
18
6.2
Installation of Base Station in rack
The Base Station is fitted in a 19"rack:
1.
Either alone or with an accessory of dimension 1/2 19" (vectorscope, oscilloscope,
etc.) using the assembly kit for Base Station in 19" racks, part number LDK 5108.
2.
Or two Base Stations side by side using kit part number LDK 5107.
Installation of a Base Station with a 1/2 19" accessory
Equipment and tools required:
•
Rack installation kit part number LDK 5108 containing various accessories,
•
A screwdriver.
Fitting of accessory to the left of the Base Station
1.
Remove the LH lug from the Base Station by unscrewing both attaching screws.
2.
Couple the accessory rack to the LH side of the Base Station with the lugs located at
the back of the Base Station.
accessory rack