Grass Valley LDK 5417 - Manual (Page 40)

LDK 5417 + LDK 4417 User’s Guide | Base Station connections 28
4. «TALLY» receptacle
Connection of «ON AIR1» and «ON AIR2» signals.
The «ON AIR1» and «ON AIR2» signals received may be
«VOLTAGE» or «CONTACT» signals. Adaptation of the
equipment to the various types of control is described in
the «INSTALLATION» Chapter.
Example: «CONTACT» type ON AIR1.
Example: «VOLTAGE» type ON AIR1
5. «VIDEO RET 1» receptacles The «Loopedthrough» No. 1 return video input. The signal
is not loaded into the Base Station. Input level is 1 Vpp ~
75 Ohm.
Transmission of the «RET 1» video of the camera
depends on the triaxial cable length. Refer to the
specifications chapter.
6. «PROMPTER VIDEO RET 2» receptacles. The No. 2 return video (or «PROMPTER») input is
«loopedthrough». The signal is not loaded in the Base
Station. Input level: 1 Vpp ~ 75 Ohm
Transmission of the «RET 2» video to the camera
depends on the length of the triaxial cable. Refer to the
SPECIFICATION chapter.
7. «TRIAX» receptacle
Connection of the TRIAXIAL cable connected to the
camera control unit.
The cable transmits the various signals and the camera
power supply.
Output voltage: 52 Vdc; Imax: 3 A
TALLY
1 6
9
5
Female receptacle
Type: DEP09S400T
P/N: T9001515
Corresponding socket
Type: PMD2T09+Z-HE5-M2
P/N: 99.155.568
1 : Not used
2 : ON AIR1 NEG
3 : ON AIR2 POS
4 : GND
5 : Not connected 6 : Not used
7 : ON AIR1 POS
8 : ON AIR2 NEG
9 : Not connected
TALLY
1 6
9
5
ON AIR1
TALLY
1 6
9
5
-
+
U
ON AIR1
U=5 - 48V
VIDEO RET 1
Receptacles
Type: P2189-A
P/N: T9003306
PROMPTER
VIDEO RET 2
Receptacles
Type: P2189-A
P/N: T9003306
CAMERA
Receptacles:
• LEMO 75
Ω
• LEMO 50 Ω
• FISCHER
• KINGS
• DAMAR HAGEN