Grass Valley LDK 5417 User Manual
Page 31
Advertising
LDK 5417 + LDK 4417 User’s Guide | Base Station
19
3.
Tighten the six 4 mm dia. screws with the allen wrench from inside the accessory
rack to attach it to the Base Station.
4.
Place the front cover panel against the left-hand edge of the Base Station (only one
position is correct).
5.
Tighten both the 3 mm dia. screws with the screwdriver from inside the accessory
rack to fit the front cover.
6 screws F/90HC M4x5
allen wrench
front cover panel
2 screws F/90 M3x4
Advertising
This manual is related to the following products: