Grass Valley EDIUS Pro v.7.4 - Manual (Page 34)

Configuring Editing Environments
28 EDIUS - Hardware Setting Guide
[Audio Output Settings] (HDSPARK Pro/HDSPARK)
0
The settings of a monitor output device used for editing.
[System Settings] ( STORM MOBILE/HDSTORM)
0
The settings of a monitor output device used for editing.
[System Settings] (STORM MOBILE) 0 P13
[Downconvert Settings] (STORM 3G ELITE)
0
The settings of a monitor output device used for editing.
[Downconvert Settings] (STORM 3G ELITE) 0 P16
[Stereoscopic Settings] (STORM 3G ELITE/STORM 3G)
0
The settings of a monitor output device used for editing.
[Stereoscopic Settings] (STORM 3G ELITE/STORM 3G) 0 P26
[Audio Bitstream Settings] Set how to handle digital audio signals when outputting SDI embedded
audio.
When [Auto] is selected, audio bitstream is output if playback data contains
audio bitstream, and linear PCM data is output if it does not contain audio bit-
stream.
When [LPCM] is selected, linear PCM data is output.
When [AC-3] is selected, AC-3 audio bitstream is output.
When [Dolby-E] is selected, Dolby-E audio stream is output.
[Default] Restore the default settings.
[Audio Monitor] Select the audio channel to monitor.
[HDMI Audio Output Setting] Specify the output from the HDMI connector. Select if 8 audio channels are to
be output or the 2 channels specified as analog audio channels are to be out-
put.
[Balanced Audio Output Settings] Not available for HDSPARK Pro/HDSPARK.
[Default] Restore the default settings.