Audio options – Grass Valley Imagestore 750 v.3.0.1 User Manual
Page 213
197
Imagestore 750
User Manual
•
Monitor output.
If you need to enable these features at a future date, it is possible to upgrade to a standard
Imagestore 750 by purchasing the appropriate licence(s). These are highlighted with a yellow
background in the preceding options table.
Note: The
IS-750-Master-Control
option is not compatible with
IS-750-LOGO
because master
control requires A/B mixing.
Audio Options
The Imagestore 750’s audio options include an appropriate audio breakout option. These
options include a SCSI cable and a 1RU breakout box that allows easy connection of 75W BNC or
110W 3-pin, quick-release AES cables. (The SCSI pin-out is described in
The product code of the 75W breakout box is
ABT-32-32-D75
. The product code of the 110W
breakout box is
ABT-32-32-D110
.
If you have purchased the
IS-750-EAS
option without the
IS-750-Audio6
or
IS-750-Audio16
option, then a stereo audio break-out cable (product code
1872-9100-100
) is shipped with the
unit. This is a SCSI-to-XLR cable giving one stereo pair voice-over capability.
Dolby modules (Dolby decode, Dolby E encode, Dolby Digital encode) and up-mix module
options require that a Dolby carrier board also be installed. The carrier board and module
options can be retrofitted to older Imagestore 750s. Please note that if the RS-485 ports are not
present then metadata input and output will not be possible.