Grass Valley KAM-ENC-2AES v.4.0.1 - Manual (Page 13)

KAM-ENC-2AES Instruction Manual 13
Power Up
Power Up
The front LED indicators are illustrated in Figure 6 .
Figure 6. Front and Rear Module Indicator LEDs
A green Signal Present LED can be seen on the Passive Rear Module (PRM)
when a valid input signal is present.
D1 D2 D3 D4 D5 D6 D7 D8
PWR – Green diagnostic LED on indicates power OK
For factory use.
FAULT – Red diagnostic LED is off during normal operation
Ejector Tabs
Processor Module
Front Edge
COMM – Yellow LED on during remote control communication
CONF – Yellow LED on when module is initializing or processing control data
GND – Digital ground
8345_03
Signal Present green LED
CVO SD0 AES
1
SIG J10 J9 J6 J5 J4 J3 J1
SIG
J2
2900
PRM-7
J11
AES
2 AES 1 AES 2
J8 J7
AES
3
AES
4 AES 3 AES 4