Grass Valley KAM-XM-SERIES v.1.4.1 - Manual (Page 53)

KAM-XM-SERIES Instruction Manual 53
Configuration and Adjustments
Manual Mode
Enable Manual control by turning Auto off. The web page will appear as
shown in Figure 29 .
Use the controls below in Manual Mode:
• Red Overlay – when enabled ( On ), a red overlay is superimposed onto
areas in the input image where the temporal recursive filter identifies
motion.
• Auto – disabling Auto ( Off ) puts the Temporal Recursive filter in Manual
mode.
Figure 29. KAM-XM Temporal Recursive – Manual Mode