Grass Valley Kayenne XL Package Installation v.7.0.4 - Manual (Page 102)

102 Kayenne XL Package — Installation and Service Manual
Section 4 — System Cabling
Operation Hints
Pressing a delegation button delegates the AUX-CP to that function. The
delegation button is lit to indicate that status. If possible, the source buttons
show the current status of the delegated function. In most cases, this will be
the selected crosspoint on the delegated bus. If the function is TiME Memo
recall or Make Memo recall, no state is indicated because such recalls are
events.
Pressing a delegation button that is programmed to be 2nd or 3rd toggles
the shift level of the source buttons.
Pressing a source button performs the function according to the delegation.
I.e., selects the crosspoint or recalls the register or macro.
The response to a recall is a short flash of the source button.
The response to a crosspoint selection is the indication of the new cros-
spoint.
In menu Remote, the AUX-CPs can be enabled or disabled. In disabled state,
the AUX-CP performs no function. Local delegation is still possible.
Table 17.
2nd 3rd
Source Buttons
CP-300
Source Buttons
CP-330
Source Buttons
CP-3020
off off 1 .. 24 1 .. 48 1 .. 20 (+ 20 per CP-3021)
on off 25 .. 48 25 .. 62 21 .. 40 (+ 20 per CP-3021)
off on 49 .. 72 49 .. 96 41 .. 60 (+ 20 per CP-3021)
on on Not allowed”