Grass Valley Prelude v.3.0 - Manual (Page 53)

Prelude — Instruction Manual 53
Panel Conversions
2. Click the Panel Network link in the right pane. Below the NetConfig
Device ID Setting are three radio buttons: Encore, Prelude, and
Acappella. The panel’s current identity will be selected (
Figure 40 ).
Figure 40. Control Panel Device IDs
3. Select the desired control panel identity radio button.
4. Leave the The Do Reset box empty (unchecked), click Save New Settings ,
then click Discover . NetConfig will discover the device with its new
identity and display it in a different location in the Load Software and
Device View hierarchies.
5. Immediately load the correct software to the device and test its
operation.