Grass Valley Prelude v.3.0 - Manual (Page 75)

Prelude — Instruction Manual 75
Section
3
Configuration Reference
Introduction
The previous section described how to configure a Prelude system with
basic functionality. Additional controls are also available, which are briefly
described in this section.
Device Web Pages
Concerto frames have web pages available that can be used for system con-
figuration directly with any web browser. These pages are also available
through NetConfig, since it is a web browser. However, these web pages
duplicate functions that are much easier to use from within the Prelude
control system. There is little need to use the web pages directly, but they
are available should you remove the Prelude PC from the network and do
not have the Prelude UI available. Refer to the separate Concerto Instruction
Manual for specific information about these web pages.
Stand-alone Acappella systems running without the Prelude control
system employ a series of web pages for configuration and device status
reporting. These web pages are also available through NetConfig, but are
not needed for configuration if you are using the Prelude control system,
(except for Local Acappella panels). Refer to the separate Acappella Instruc-
tion Manual for specific information about these web pages.