Electrostatic precautions – Grass Valley PDR 200 Fibre Channel User Manual
Page 24
Fibre Channel Installation
12
PDR 200 Fibre Channel Installation Manual
Electrostatic Precautions
CAUTION: This product contains components that are highly sensitive to
electrostatic discharge. To protect these components from damage and to
maintain product reliability, take the following precautions when handling
the circuit boards.
• Handle all circuit boards in a static-protected area capable of controlling
static charge on conductive materials, people, and non-conductive
materials. Static-protected areas include non-static table tops and
non-static floor mats.
• Use a static discharge wrist strap when handling circuit boards.
• Handle the circuit boards only by the edges. Avoid touching the printed
wires on the back of the circuit board as much as possible.
• Leave the board in its static-shielded bag until you are ready to install the
board.
!