Grass Valley SME-1901 v.1.20 - Manual (Page 25)

GUIDE TO INSTALLATION AND OPERATION
SME-1901 / 1911 | 21
• Click the save button once the name and location have been identified in the Save box
• If the file is saved correctly, the Transfer Status box on the right of the Copy profile from line will indicate
Succeeded against a green background.
• If the file was not saved for some reason, the Transfer Status box to the right of the Copy profile from line will
indicate Failed against a red background
Restore profiles from disk…
Click this button to open an Open dialog box within which you
can locate and select a valid SME-1901 or SME-1911 profile
file.
• Click Open to read the contents of the file and to
reconfigure this SME-1901’s or SME-1911’s profiles
according to its contents
• While the reconfiguration is in progress, the Transfer
Status box on the right of the Copy profile from line will
indicate Working against a yellow background
• When the reconfiguration is complete, the Transfer Status
box on the right of the Copy profile from line will indicate
Succeeded against a green background
Copy profile to section
This line shows other SME-1901 or SME-1911 cards that are available on the iControl network, each identified by App
server, Densité frame and slot number, card type and firmware version.
The Profile column shows the same information as is shown for the current card in the Copy profile from line, i.e. one
of the following:
• Current, User1, User2, User3, User4, User5, All
The Select column includes a checkbox to identify which SME-1901 or SME-1911 cards you wish to copy profiles into
from the current card.
• For convenience, a Select all checkbox is provided in the column header.
Click Copy to copy the selected profiles from this card into the selected other SME-1901 or SME-1911 cards.
• While the profile copy operation is in progress, the Transfer Status box on the right of the Copy profile to line will
indicate Working against a yellow background.
• When the profile copy operation is complete, the Transfer Status box on the right of the Copy profile to line will
indicate Succeeded against a green background.
5.10 Alarm Config panel
This panel allows the alarm reporting of the SME-1901/1911 to be configured. The panel opens in a new window
when the button is clicked, and can be resized if needed.
Figure 5-15 Restore Profiles from Disk dialog