Polaris 2003 Victory Classic Cruiser - Manual (Page 84)

82
OPERATION
Engine Break-in Period
Starting the Engine
The Victory motorcycle has a starter interlock system. The engine can be started only when the transmission is in
neutral or when the transmission is in gear and the clutch is disengaged.
Follow these steps to start the motorcycle:
1. Unlock the steering lock (see page 45).
2. Perform the Pre-Operation Check as outlined beginning on page 64. If you’re carrying cargo, inspect the cargo
restraints for tightness.
3. Insert the ignition key into the ignition switch and turn the switch to the ON position (see page 46).
4. Mount the motorcycle and bring it to an upright position. Engage the front brake and place the sidestand in the
stored (up) position. If the neutral indicator is not illuminated, shift the transmission to neutral (see Shifting
Gears, page 84).
5. If the engine is cold (has not been run in a few hours) move the fast idle lever toward the rear of the motorcycle
until the lever stops.
6. Set the engine stop/run switch to the RUN position. You should hear the fuel pump momentarily as it
pressurizes the fuel system.