Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 105)

101
Pre-Ride
Pre-Ride Inspections
Brake Pads
Inspect each front brake pad on both sides of
the front disc. Inspect each rear brake pad on
both sides of the rear disc. When the thinnest
point of the friction material has worn to the
minimum recommended thickness, see your
VICTORY dealer for brake pad replacement.
• Replace brake pads when friction material
thickness reaches 1.0 mm.
When checking brake pad friction material
thickness, check each brake caliper for damp-
ness or stains from leaking or dried brake
fluid. If inspection reveals signs of fluid leak-
age, do not operate the vehicle. See your VIC-
TORY dealer for service.
See page 186 for brake disc inspection.
Friction
Material
Minimum: 1.0 mm
Front Rear
9922441.book Page 101 Monday, May 11, 2009 1:16 PM