Emotiva USP-1 - Manual (Page 5)

5
SAFETY PRECAUTIONS
Read this User's Guide thoroughly before attempting to install and configure the USP-1 Preamplifier. All
the safety and operation instructions should be read before any operation of the component(s) begin.
After successful installation and configuration of the USP-1 Preamplifier, be sure to retain this manual in
a safe place for any future reference needs.
All warnings on the USP-1 Preamplifier and in these operating instructions should be followed. Safety is
a key component to a long lasting and trouble free installation. The vast majority of the subsequent
safety precautions involve simple common sense. If you are not comfortable with the installation of
audio/video entertainment equipment, it will be to your benefit to seek the services of a qualified
installation professional.
The Emotiva USP-1 Preamplifier should NEVER be used near water such as a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement or near a swimming pool etc.
The Emotiva USP-1 Preamplifier should be situated so that its location or installation position does not
interfere with proper ventilation.
The Emotiva USP-1 Preamplifier should not be situated on a bed, sofa, rug or similar surface that may
block any ventilation openings; or placed in a built-in installation such as a bookcase, cabinet, or closed
equipment rack that may impeded the flow of air through ventilation openings. If installed in a closed
equipment rack for custom installations, be sure to add forced air ventilation so that it has adequate air
circulation.
The Emotiva USP-1 Preamplifier should be situated away from heat sources such as radiators, or any
other devices which produce heat.
The Emotiva USP-1 Preamplifier should be connected to a power supply only of the type described in
this User's Guide and what is labeled on the Emotiva USP-1 Preamplifier component. Power supply
cords should be routed to that they are not in high foot traffic areas or pinched by item placed upon or
against them, paying particular attention to cords at the wall plugs, convenience receptacles, and the
point where they connect into the Emotiva USP-1 Preamplifier. The power cord for the Emotiva USP-1
Preamplifier should be unplugged from the outlet when unused for a long period of time.
When it's time for cleaning the Emotiva USP-1 Preamplifier, it should be cleaned only as recommended
in this User's Guide Never spray liquids directly into the component's vent openings. Care should be
taken so that small objects do not fall into the inside of the Emotiva USP-1 Preamplifier.
The following situations require that your Emotiva USP-1 Preamplifier be serviced only by qualified
service personnel;
1. The power-supply cord or the plug has been damaged; or
2. Objects have fallen, or liquid has spilled into the component; or
3. The USP-1 has been exposed to rain; or
4. The USP-1 does not appear to operate normally or exhibits a marked change in performance; or
5. The USP-1 has been dropped, or its enclosure or chassis is damaged.
The user should not attempt to service the USP-1 Preamplifier beyond the means described in this
User's Guide. All other servicing should be referred to Emotiva.