HEIDENHAIN TNC 306 Service Manual - Manual (Page 148)

HEIDENHAIN Service
Processing and Program Run
Function MP TNC TNC .NC CNC Input AE-6
No. Bit 2500 360 306 234 Input Value
Cycle "Scaling Factor" active on 2
or 3 axes 7410* ‹ ‹ ‹ ‹ 0 = 3 axes
1 = in the operating plane
0
Cycle 7 "Datum" 7411 - - 04 - 0 = values from the datum table
for the C-axis are treated as
rotation and displacement
values
1 = values from the datum table
for the C-axis are only treated
as displacement values
0
Tool data in a
TOUCH PROBE block
7411 07 10 - - 0 = the current tool data are
overwritten by the
calibrated touch probe data
1 = the current tool data are
stored
1
Function of a CYCL CALL after a
CYCLE DEF
7412 - - 11 -
0= with CYCL CALL a PGM xxxx
is called like an OEM cycle, i.e.
the blocks of the program do
not appear, and local Q-
parameters are stored.
1 = the CYCL CALL acts like a
PGM CALL xxxx, but with the
M functions M89/M99 being
active.
0
* accessible via code number 123
R.H. TNC 306/355/360/2500
1.0 CNC 234/306 Machine Parameters MP 7410 - MP 7411 15.03.95 26.2 26