HEIDENHAIN PT 855 for Milling - Manual (Page 57)

I - 4 Programming POSITIP
POSITIP 855 Operating Instructions 55
Transferring positions: Teach-In mode
Changing nominal positions after they have been transferred
Positions which you have transferred into a program with Teach-In
can be changed. It is not necessary to leave the Teach-in mode to
do so.
Enter the new value in the input line.
Example: Change a block transferred with Teach-in
Operating mode:
PROGRAMMING AND EDITING, Teach-In
Go to
TEACH-IN / PROGRAM
.
/
With the arrow keys (or GOTO), move to the block you wish to change.
/
Select the block.
3 0 Enter a new nominal position value (such as 30 mm)
and
change the tool radius compensation.
ENT
Confirm your changes.
N o m i n a l p o s i t i o n v a l u e ?
Functions for changing a Teach-In program
Function Soft Key
Abort and return to main menu
PROGRAMMING AND EDITING
Delete current block