Epson 2000 - Manual (Page 136)

10-6 Replacing Ink Cartridges
R4C428_V2
long.bk
Rev_C
A5 size INK.FM
1/14/00 Pass 2
L Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
c
Caution:
Once you install the ink cartridges, do not open their clamps
again until you replace the cartridges. Otherwise, the
cartridges may become unusable.
Note:
If you need to replace the black ink cartridge as well, you can do so
now. Press and release the
R
cleaning button quickly. The print
head automatically moves to the black ink cartridge replacement
position. Refer to “Replacing a black ink cartridge” on page 10-6 for
details.
7. Make sure the B black and A color lights are off, then press
and release the
R
cleaning button quickly. The Stylus Scan
moves the print head and begins charging the ink delivery
system. This process takes about one minute to complete.
When the ink charging process is finished, the Stylus Scan
returns the print head to its home position and the
P power
light stops flashing.
Note:
If you replace the ink cartridge before a print job is finished, the
Stylus Scan automatically prints the remaining pages of the print
job once the ink cartridge is replaced.
c
Caution:
The
P power light continues to flash while the Stylus Scan
performs the ink charging operation. Never turn off the
Stylus Scan while this light is flashing. Doing so can result
in incomplete charging of ink.
8. Close the front cover.
Replacing a black ink cartridge
To replace a black ink cartridge using the Stylus Scan’s control
panel, follow the steps below.